89fiveohman
Registered
- Joined
- Mar 28, 2009
- Messages
- 12
will the stock chain work with the stock 17 front sprocket and a 44 rear sprocket?
Hayabusa Owners Group
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
stock chain length question
- Thread starter 89fiveohman
- Start date
n_ikkon
Registered
- Joined
- Nov 26, 2008
- Messages
- 41
It is always recommended that if you are changing your sprockets that you should change your chain as well.
To answer the question, would normally be no, but if your current chain is old, worn and stretched, it might just fit. The rear tire would be in closer.
To answer the question, would normally be no, but if your current chain is old, worn and stretched, it might just fit. The rear tire would be in closer.
- Joined
- Nov 18, 2004
- Messages
- 8,787
On and Gen II bike yes. On a Gen I bike no. 114 vs 112 stock chain length is the difference.
If it fits because the chain is old you need to check the service length. 12.57" over a 20 pin count.
If it fits because the chain is old you need to check the service length. 12.57" over a 20 pin count.
Last edited:
89fiveohman
Registered
- Joined
- Mar 28, 2009
- Messages
- 12
alright thanks for the info guys!
RedBull
Registered
- Joined
- Jul 19, 2003
- Messages
- 10,760
89fiveohman
kim windsor
Registered
- Joined
- Nov 17, 2017
- Messages
- 1,019
Happy Birthday Mike
Similar threads
