19 tooth front sprocket

Yeah, I looked on his website and will probably buy a Supersprox rear from him but didn't see a 19 front. I figured maybe some of the turbo guys would know who makes one.
 
Brokenchickenleg said:
Yeah, I looked on his website and will probably buy a Supersprox rear from him but didn't see a 19 front. I figured maybe some of the turbo guys would know who makes one.
Click to expand...

Them, or touring guys like Pashnit. If he doesn't have it listed he may still know or be able to get it.
 
Do a search for a member named Spkrdctr and sprocket. I had a PM conversation with him a while back about a 19T sprocket he installed. I will end up doing that mod one day, but just kept the PM's for my reference.
 
Charles at Street N Track! The 19 tooth rocks! I am putting my 40 tooth rear sprocket on today. But will not be able to ride it until next week. The King has so much torque that combining it with the 1st gear ratio was too low for street/highway riding. I kept trying to shift into a non-existant 7th gear!!!:laugh: The 40 tooth rear and the 19 front uses the stock chain! It should really turn the bike (hopefully) into a nice street bike and freeway bike. I don't race and 1st gear pulls too hard for me to do nothing but hang on anyways. I'll let you all know how it goes after I ride it next week.
 
Spkrdctr said:
Charles at Street N Track! The 19 tooth rocks! I am putting my 40 tooth rear sprocket on today. But will not be able to ride it until next week. The King has so much torque that combining it with the 1st gear ratio was too low for street/highway riding. I kept trying to shift into a non-existant 7th gear!!!:laugh: The 40 tooth rear and the 19 front uses the stock chain! It should really turn the bike (hopefully) into a nice street bike and freeway bike. I don't race and 1st gear pulls too hard for me to do nothing but hang on anyways. I'll let you all know how it goes after I ride it next week.
Click to expand...

19/40 is pretty dang tall...

How much power are you making?
 
Got-Busa? said:
19/40 is pretty dang tall...

How much power are you making?
Click to expand...

Bone Stock! Street only bike. I don't race it as I don't have the skill to do it yet. If I did, the sprockets would go the other way....

I have no performance loss with the 19 and get very good gas mileage, well, unless I hammer it, then it drops from 45 to about 18....:cheerleader:

I'll see how the 40 sprocket does for the street. Gearing Commander shows it should be perfect for street riding. I will try it and report back!:thumbsup:
 
I've been running a 18/38 combo on my turbo. Pump fuel and 10.5 psi. I have 320 at the wheel. This is my cruising sprocket combination. Still has enough get up and go and gets great mileage if I don't hammer the throttle.:cool:
 
Spkrdctr said:
Bone Stock! Street only bike. I don't race it as I don't have the skill to do it yet. If I did, the sprockets would go the other way....

I have no performance loss with the 19 and get very good gas mileage, well, unless I hammer it, then it drops from 45 to about 18....:cheerleader:

I'll see how the 40 sprocket does for the street. Gearing Commander shows it should be perfect for street riding. I will try it and report back!:thumbsup:
Click to expand...

Are you sure you don't mean 19/43?

19/40 on stock motor is going to be rough at slow speeds. Heck, you'll idle at like 25mph... :laugh:
 
You must log in or register to reply here.

Similar threads

T
19 tooth front sprocket?
2
Replies
22
Views
6,588
RedBull
RedBull
M
2008 19 tooth sprocket...
Replies
10
Views
2,086
BUSAnomics
B
Tha One
17 tooth front sprocket
Replies
14
Views
4,907
2Wheels2Live
2Wheels2Live
greg3852
Gen 1 19 tooth front sprocket?
Replies
11
Views
1,732
michael parris heuberger
michael parris heuberger
Htown Busa
Front offset sprocket
Replies
6
Views
3,047
Htown Busa
Htown Busa
Back
Top