08/09 Fork measurements

[TwinJugs]

Hi all,
New here. I'm looking for upper and lower outer diameter fork measurements where the forks slide into the triple clamps. Looking to upgrade on a project.

 

[atticdog]

I think they are 1mm thicker than gen 1 forks

 

[TwinJugs]

What I'm trying to do is mount a set of Radial Mount forks on my TL1000R. I know the Hayabusa has the 25mm internals and a great look. I just need to know if the measurements are either the same as Gen I (that would be perfect) or if I need another set of triples.
Anyone have a set of calipers laying around and want to walk out into your cold gararge and wish your busa a Happy New Year and quickly take a measurement?
There might be a 2 liter bottle of Fresca in it for you. And not the diet crap either.lease:

 

[atticdog]

I can measure it on monday my calipers are at work
I have 08 forks on my gen 1 busa I had the lower clamp bored out 1mm

 

[TwinJugs]

bump. Any help would be appriciated.

 

[twotonevert]

Welcome to the oRg, someone will chime in with the information you need.

 

[djsin]

hell i think for 1mm all youd need is some sand paper and 20 minutes of your time..???

 

[TwinJugs]

Sand paper...........Oh good call.

 

[atticdog]

sorry i forogt my calipers ill bring them home tomorrow

 

[atticdog]

wel i know the upper is the same and the lower is 1mm bigger

 

[atticdog]

my 6" calipers wont fit anywhere to measure

 

[TwinJugs]

Well...thanks for the effort.
Chris

 

[atticdog]

this weekend ill take a side panel off then i should be able to measure it