08 Air Shifter?

ToXSicK RoCKeT

Registered
Sup Guyz & Galz, I wanted to get some input on the BEST BANG FOR MY BUCK Air shifter(Possibly kit), now that I have my Wego 3 coming....this will be next! I've never ran anything other than my left foot and with all the different kits(and combo's)out there.....im kinda confused on what to get? I'm not against piecing a kit together, but what to getz the problem.....low or high PSI(WTF is the difference?), what type/make kill box(is killing the ign or fuel better?....I am going to spray dry also), whats a decent actuator, whats a good size bottle to run(I have some left over paint ball tanks, will these work)? Sorry Fellaz, I know this is ALOT of questions but I'm LOST on the whole air shifter components, and do NOT want to buy twice! I Thank EVERYONE in advance for any and all help......YOU GUYZ ARE AWESOME :beerchug:
 
I have never heard of killing the fuel.I use the pingle electric shifter.You just pull in the clutch handle hold button in 5 seconds+ its ready.I did have set the kill kinda high it adjusts easy.Some guys think its kinda big mine hasnt missed a shift 2 seasons now.Very reliable doesnt need air.i have found a fairly new tranny requires a bit more kill time.Comes with mounting bracket most of them dont.

2w4b57l.jpg


Thats button 4 it (NOTICE HOW SMALL EASY 2 FIT) shifts up or down. NOT THE BIG BUTTON IM LAUNCHING OFF THAT.

However I dont use downshift because think that could be hard on tranny.

24eyfjn.jpg
 
Last edited by a moderator:
I can give you a fair price on a complete kit,give me a call to discuss options you want..503-663-3278
 
If you're gonna run spray, have Daniel price you a regulator in addition to the ram, solenoid and kill box, run your shifter off nitrous.
 
CycleTek.com The best air shifter kit on Co2. Co2 gets you about 1000 shifts before refill.
Yeah I agree on the Cycle Tek, very good product. I use one myself for drag racing. The only draw back is I got the smaller bottles for my 08 so they fit in the "trunk" . I usually get 8 to 10 runs out of it and then I change to a fresh bottle.
 
Yeah I agree on the Cycle Tek, very good product. I use one myself for drag racing. The only draw back is I got the smaller bottles for my 08 so they fit in the "trunk" . I usually get 8 to 10 runs out of it and then I change to a fresh bottle.

With my air ride and on board compressor and tank....Matt set me up with just a normal air set up vs the Co2. He is the man. Him and Boostbysmith have great products that are made to work together.:thumbsup:
 
Yeah I agree on the Cycle Tek, very good product. I use one myself for drag racing. The only draw back is I got the smaller bottles for my 08 so they fit in the "trunk" . I usually get 8 to 10 runs out of it and then I change to a fresh bottle.

This is my triple 9oz bottle setup. A simular setup can be installed in the hump of the 08 Busa
Tailsection.jpg
 
You can use a 9oz. bottle in the trunk of your 08. I have friend that has that set-up in his. I'm using the smaller bottle.
 
With my air ride and on board compressor and tank....Matt set me up with just a normal air set up vs the Co2. He is the man. Him and Boostbysmith have great products that are made to work together.:thumbsup:

What BigRod said. Ask Matt for his setup running normal air, and run out to Autozone and buy a $15 compressor pump that you can stick in the trunk. After you pull the plastic housings off the pump there very tiny. A lot of folks at our track have abandoned CO2 after running out at the worst time possible. With a compressor, you always have pressure.
 
What BigRod said. Ask Matt for his setup running normal air, and run out to Autozone and buy a $15 compressor pump that you can stick in the trunk. After you pull the plastic housings off the pump there very tiny. A lot of folks at our track have abandoned CO2 after running out at the worst time possible. With a compressor, you always have pressure.

With more than one bottle that is not a problem
 
electric shifters :moderator:(SUCK ) and are not for Drag racing

Yea guess thats why mine has not missd a shift in 3 years.:rolleyes2:

I dont sell parts get what ya want but beware of the bs.

all I use it 4 is dragracing.
 
Last edited:
Thank You ALL very much for all input! :beerchug: I ended up with an MPS co2 system, and used a pait ball tank.
I know......i know "wherez the pics?"......I will get some up shortly, so CALL OF THE DOGZ! :laugh:
 
Back
Top