08 busa crank!!!!

[babyjay]

Hey all,I was wondering if anyone has done the 08 crank in the 1st generation busa's, and if so are there any major concerns I hould be aware of before I start mine. I have a 2002 busa with a 1398 kit and intake cam on the exhaust side,and basically all the mods this bike can have.But a major concern I have is the application of the stroker crank with the kit I already have and the problems I might face as far as starting when hot,a two battery system,and the fact it's an every day rider.All positive and negative feedback welcomed....thanks BabyJay

 

[twotonevert]

Welcome to the oRg! Wish I could answer your question, but someone will be along and be able to explain things for you.

 

[BusaWizard]

I know it can can be done noy sure what all is involved in installing it. ??? There are people on here that do though.

 

[xtremetony]

--------------------------------------------------------------------------------

What about setting cam timing I did the whole crank,rods, and piston swap
the starter clutch from the 06 to 08 there is a different spline on the o8 crankshaft. OFCOURSE I can't set timing has anybody done this swap

 

[xtremetony]

I did the whole swap starter clutch is different from the 06 to the 08 the splines are not the same. and with the 08 starter clutch are the timiing specs the same for cam timing I will be degreeing the cams anyway.Also does anyone have a 2008 starter clutch for sale need one ASAP building a Turbo Busa CyclePalooza