2008 and up shift light set up

[071300r]

LEFT BUTTON - SELECT ***** RIGHT BUTTON - ADJUST

1. Press and hold the left (SELECT) button.
2. Turn the ignition on, continue to hold the select button down until the instrument panel boots up .
3. Release the select button.
4. Press the right (ADJUST) button one time.
5. A symbol that resembles a lightning bolt will appear.
6. Pressing the right button again will toggle through the shift light settings--- on, flash or off.
7. Press the left (SELECT) button again... one time.
8. Little dots/squares appear - this is the brightness setting for lamp.
9. Press the right button to add more dots - more dots brighter lamp.
10. Press the left (SELECT) button again- tach needle will move to default setting.
11. Press the right (ADJUST) button to move the tach needle to the desired setting.
( 500rpm at a time below 8000 rpm, 250 above 8000 rpm)
12. Press the left (select) button to exit out.

 

[tex_garza]

 

[mestona]

Might wanna add that the bike has to be in neutral (if you don't hear the fuel pump run once the key goes on this will not work).

 

[surt]

Amazing, I didn't know I had this function.
Thank you!