Adjustable lowering links and kickstand on stock arm?

[Busa3Bro]

What adjustable lowering links and kickstand are y'all using on your stock arm?
I'm wanting to lower the bike on the stock arm just a bit.
What aftermarket ones are y'all using?

 

[Rojo]

Soupy's Adjustable Lowering Links | Gen 2 Busa Information

Put a set on this afternoon and lowered the rear a bit. ...stock height ...lowered a bit

www.hayabusa.org

Gen 2 & Gen 3 are the same *

 

[pcs]

i’ve used the 3 hole and now switched to adjustable ones for racing purposes. i have 2 sets, one new one used, listed for sale if u are interested

Hayabusa Fully Adjustable Lowering Links

Hayabusa fully adjustable lowering links... Made from 416 stainless steel body, black.ox coated and zinc plated ends for high corrosion resistance and good looks...They are high strength links that use the factory bolts..Not the wrong sized ones you will find with new bolts that fit sloppy...

saeoutlawperformance.com

 

[SS4Luck]

The street version of the Brocks kickstand will work with a basically full height bike as well. its Adjustable if you go lower in the future too

 

[InfiniteReality]

Don't recommend Brocks unless they changed design, they are longer than stock when turned all the way in. Had to return them, with some headache, to get a refund.

Brock's kickstand worked, but I prefer a longer one. If you're interested in Brock's, still have mine.

I run SAE links like above now.

 

[dcnblues]

I've got a pair of the soupies. DM me.

 

[Busa3Bro]

i’ve used the 3 hole and now switched to adjustable ones for racing purposes. i have 2 sets, one new one used, listed for sale if u are interested

Hayabusa Fully Adjustable Lowering Links

Hayabusa fully adjustable lowering links... Made from 416 stainless steel body, black.ox coated and zinc plated ends for high corrosion resistance and good looks...They are high strength links that use the factory bolts..Not the wrong sized ones you will find with new bolts that fit sloppy...

saeoutlawperformance.com

Messaged you.

 

[Busa3Bro]

Don't recommend Brocks unless they changed design, they are longer than stock when turned all the way in. Had to return them, with some headache, to get a refund.

Brock's kickstand worked, but I prefer a longer one. If you're interested in Brock's, still have mine.

I run SAE links like above now.

Messaged you.

 

[Rojo]

How to install lowering links? | Busa Mods

What is the step by step instructions for installing lowering links on a 2007 hayabusa

www.hayabusa.org

 

[RUMburglar]

Anyone else had/having issues taking the factory 17mm nut off the lower rightside link??? I have 3 threads left and I'm STILL using a breaker bar.

 

[Dustin02]

Might end up needed a new nut and bolt afterwards...

 

[RUMburglar]

Anyone else had/having issues taking the factory 17mm nut off the lower rightside link??? I have 3 threads left and I'm STILL using a breaker bar.

View attachment 1687298

I'm dumb... Just realized I was turning the whole bolt.. Intalled the breaker bar on the head bolt side and the nut came right off

 

[sixpack577]

I'm dumb... Just realized I was turning the whole bolt.. Intalled the breaker bar on the head bolt side and the nut came right off

View attachment 1687299

lmao...but I think we've all done that at some point...admit it or not

 

[Rojo]

Wheel Balancer and Bead Breaker | Maintenance and Do-It-Yourself

Trying to save money on maintenance this year so i made a Wheel Balancer. Most of the parts were donated. The main frame is made of Unistrut. Is used mostly for electrical installations. It is a very versatile system. The mandrel is 1/2 drill rod and Nylon cones. I am planning a...

www.hayabusa.org