After market custom rotors on ebay

[chriswill]

new to the board...and the suzuki family...but I'm here to stay.  This board kicks A$$ and so does my new 04 Busa...Pics coming as soon as I get it back together... cant' stand riding a stock bike....

Back to the quesiton...I've notices alot of people making custom rotors.. I'm proably gonig with some spinner wheels and won't the smallest rotor I can find as not to take away from the wheels.  I've seen these on ebay

can't get stupid picture to post, proably cause I'm at work and should be working.

ebay rotors

and was wondering if anybody knows anything about them, are they any good are they safe things like that...if not I'll end up just going with a standard wave rotor from a reputable manufacture.

 

[Revlis]

Avoid the spinners unless you plan on just using the Busa for Cruising and posing, They are freakin HEAVY.... As for the Rotors, I would'nt touch em' stick to performance parts for a performance bike. But again, if your not into actually riding and just want to cruise and pose, spinners and these rotors would probably be just fine.

 

[monsterspeedfreak]

I'm runnin that rotor on the rear.....has about 2k on it.....no problems at all.

 

[arey]

I also have them on my bike. No problems either.

 

[Revlis]

See, Just I like I said If your just cruisin and posing the rotors will work just fine... But not if you actually ride the Busa like you know what your doing...

OK OK Just playing... But I personally wouldn't trust them at all, to many fine bits left cut out, one gets warped funny, Snagged on some road kill, bent wrong, then gets caught in the Caliper... while out hammering things... Your done...

 

[BulletTrain]

See, Just I like I said  If your just cruisin and posing the rotors will work just fine...  But not if you actually ride the Busa like you know what your doing...  

 

OK OK Just playing...  But I personally wouldn't trust them at all, to many fine bits left cut out, one gets warped funny, Snagged on some road kill, bent wrong, then gets caught in the Caliper... while out hammering things...  Your done...

OUCH!!! Hehehehehehe...

Good one there, Rev!

 

[Revlis]

 

[fstbusa]

wave rotors are a waste of $$ in my opinion

 

[monsterspeedfreak]

See, Just I like I said  If your just cruisin and posing the rotors will work just fine...  But not if you actually ride the Busa like you know what your doing...  

 

OK OK Just playing...  But I personally wouldn't trust them at all, to many fine bits left cut out, one gets warped funny, Snagged on some road kill, bent wrong, then gets caught in the Caliper... while out hammering things...  Your done...

 

[monsterspeedfreak]

wave rotors are a waste of $$ in my opinion