Airbox mod

dirty dave

Registered
Hi guys new to the site pics coming soon anyway I have an 05 with yosh R22 bolt onns, TRE, PC III, pair valve removed and BMC air filter which airbox mod would be the best without causeing any major changes with ridability.
 
Welcome!

Start here....

https://www.hayabusa.org/forums/?act=SF;f=13

Then roam the site and Check the stickies/pinned. Here is a hint to start about the air box mod...

https://www.hayabusa.org/forums/?act=SF;f=47

Is OK to post in the stickied/pinned thread any questions that aren't answered. The more info contained in one thread the mose useful that thread becomes. Vs being scattered over numerous ones.

Tons of good info on this site. More then anyplace else! Crack open a beer and enjoy your time reading.  
biggrin.gif
 
I tryed to cheat and just plug the vaccum line to the flapper, now rpms jump up to 2,000 sitting still once in awhile never did that before what gives?
 
Any changes like that you make, you will have to tune for it.

With slip-on's I'd say leave the air box stock. You won't gain enough on top (with the restrictive stock header pipe) to make up for the loss on the bottom.
 
Will do, I figure I`ll just hook the vaccum line back up and call it good. Im getting about all I can out of if the way it is. Thanks for the help
 
Back
Top