Anyone got the tail plastics off?

[SS4Luck]

Putting my bike back together and thought I paid better attention, took more pics, kept things organized. But I have no idea what 3 bolts go in the bottom of the tail light, I just need a picture of the head

 

[QFry]

None of my photos with my tail off show those three specifically. If I have time tomorrow and you're still looking I can go out and take it off real quick. In the meantime...

 

[SS4Luck]

Got it sorted, they’re just normal black screws. When you get the two bolts in the top snugged down everything slides into place. Before it looked like it needed a bolt with a shoulder but the grommet holds the posts coming from the under tail.

 

[Rojo]

Gsxr Tail Conversion | Gen 2 Busa Information

Hi all, thought I might share some pics of my Busa complete with freshly installed GSX-R1000 tail. It's amazing how long it takes to finish something like this, as I'm sure you all know its always the little details that hold things up. Big thanks to Gregg from Greggs Customs who had to...

www.hayabusa.org

 

[dcnblues]

If you are not a member of the club who has clicked the rear seat or the cowl into place after reinstalling the tail, and then you realize you forgot to connect the key cable to the lock release, you really don't want to be.

Do whatever you have to do to remember to reattach that lock cable when you are putting the tail together!

 

[Rojo]

Anyone cut their forks yet | Gen 3 Busa Information

I know it’s big in the Gen 2 world to cut/space/limit travel with the forks to lower the bikes that are straight line oriented. There’s also the trac dynamic slammer inserts that are more of a plug and play option. Has anyone gone this route with a Gen 3 yet? I would like to drop the front...

www.hayabusa.org

need GPS Jordan *

 

[SPECIALFORCESOFGOD]

Anyone cut their forks yet | Gen 3 Busa Information

I know it’s big in the Gen 2 world to cut/space/limit travel with the forks to lower the bikes that are straight line oriented. There’s also the trac dynamic slammer inserts that are more of a plug and play option. Has anyone gone this route with a Gen 3 yet? I would like to drop the front...

www.hayabusa.org

View attachment 1675880
need GPS Jordan *

I wanna watch the video just for that Derpy Dobbie!

 

[Rojo]

Better late than never build thread | Gen 3 Busa Information

Pry should have started this sooner, but i figure it’s time to put all the poop my bike has been through in one place. End goal for the bike is 450lbs, 450hp and a 215 mph half mile while still looking like a street bike not a hacked up race bike. The bike will always have headlights/taillights...

www.hayabusa.org

carbon tail looks SYK Jordan *