Best Frame Sliders/Stunt Cage for 2011 Pearl White Busa
- Thread starter Beezy
- Start date
Freechance
Registered
Go with frame sliders..
I think the cages set low and can scrape around corners..
But if something does happen either way somethings going to have scratches..
I think the cages set low and can scrape around corners..
But if something does happen either way somethings going to have scratches..
congrats and welcome. pic of "stunt cage" by Race Railz (not my bike)
Frame sliders are either cut or no-cut, your choice. I prefer NO-CUT and have T-rex on mine (hard for me to justify cutting a hole in a perfectly fine fairing to protect it from scrapes).
Pic of T-REX (NOT my bike): https://www.hayabusa.org/forum/gen-...nstalled-my-t-rex-no-cut-sliders-finally.html
Frame sliders are either cut or no-cut, your choice. I prefer NO-CUT and have T-rex on mine (hard for me to justify cutting a hole in a perfectly fine fairing to protect it from scrapes).
Pic of T-REX (NOT my bike): https://www.hayabusa.org/forum/gen-...nstalled-my-t-rex-no-cut-sliders-finally.html
Freechance
Registered
Those cages look better than the one i saw..
Freestyle Ingenuity / F I Cages.com - Sliders
I have extended frame sliders on mine from Freestyle Ingenuity. They stick out a lil further then most but they do work (dont ask how I know). They also have mini cages and engine cages along with other stuff.
I have extended frame sliders on mine from Freestyle Ingenuity. They stick out a lil further then most but they do work (dont ask how I know). They also have mini cages and engine cages along with other stuff.
cheferman65
Registered
FYI: Frame Sliders are just that, to aid and prevent the frame from contacting the ground in a slide. They will not protect your plastics as you would want them to or would think they should as that is not what they were designed to do. I'm not trying to insult your intelligence just offering a bit of insight.
I'm still looking for "race rails" that will work on a Gen 2. The ones you usually find that "say" they will work, almost look generic and there are never any pics of them on a Gen 2.. 
Lurch has a set on his Gen 1 and I love 'em, but his brand doesn't make Gen 2 ones..
Lurch has a set on his Gen 1 and I love 'em, but his brand doesn't make Gen 2 ones..
+1 MILLION. THIS right here needs to be made a STICKY and perhaps will make the "debate" between CUT vs. NO-CUT moot and academic.
Like I have said many times before, ANY slider is better than none and they are best for driveway tip-overs.1SlowBusaKid
Registered
I'm still looking for "race rails" that will work on a Gen 2. The ones you usually find that "say" they will work, almost look generic and there are never any pics of them on a Gen 2..
Lurch has a set on his Gen 1 and I love 'em, but his brand doesn't make Gen 2 ones..
What about the race rails that kromdom pictured in post #3?
ssg_petty_210
Registered
Do sliders. Although that cage posted above looked good and would not scrape on a hard turn. With frame sliders its all about how you position them. If you look at my sliders on my bike in my sig, I accidentally let the bike fall over once and my plastics never touched the ground, no scratches or cracks what so ever. Everyone asks me why I chose to put them that high, thats why lol.
1SlowBusaKid
Registered
The race rails he posted are on a Gen 1. The other pic is just sliders..
Ahh. Well, if you add them to your cart on their website, a drop down menu gives you the option of selecting the 08+ model. I did yesterday so we'll see if it fits. Keep you all posted
I am thinking about some upfront appearance mods for the bike. Any suggestions are appreciated.
I need help putting together a parts list for the '11 Busa. All I have right now is Dual Yosh TRC pipes. What would you suggest for: lower rear/front (not 100% on lowering front, should I?), extend swingarm (black), competition kickstand, and tank protector (I want to cover some of the white so like a gripper pad/tank protector). Any other suggestions?
I need help putting together a parts list for the '11 Busa. All I have right now is Dual Yosh TRC pipes. What would you suggest for: lower rear/front (not 100% on lowering front, should I?), extend swingarm (black), competition kickstand, and tank protector (I want to cover some of the white so like a gripper pad/tank protector). Any other suggestions?
satisfied
Registered
You need a set of canyon dancers. spend the 35 bucks best money spent. no more rags and no more worries of cracks.
Canyon Dancer Bar-Harness 39205
Canyon Dancer Bar-Harness 39205
1SlowBusaKid
Registered
I'm still looking for "race rails" that will work on a Gen 2. The ones you usually find that "say" they will work, almost look generic and there are never any pics of them on a Gen 2..
Lurch has a set on his Gen 1 and I love 'em, but his brand doesn't make Gen 2 ones..
I finally received the Racing 905 race armor pieces the other day and installed them on the right side. You can see a pic here:
I'm having an issue with the left side, however. The engine bolt that is supposed to go THROUGH the hole winds up getting threaded and bottomed out. Here's a few pics:
There's no way that nut is passing through that end to secure it to the bike:
The threaded portion:
Anyone have any ideas?
cheferman65
Registered
Are the bolts on the left and right different lengths? Check the instructions/part list. Call tech support as I have no real world experience with the brand of rail your installing. Good luck and let us know the results.
1SlowBusaKid
Registered
Haha well silly me. I misplaced the instructions that night and I decided to go look for them 
After I found them, the instructions said to REVERSE the rear engine bolt's direction and insert it from the opposite side. Then it threaded right in and the left rear rail acted as a nut.
She's on now.. silly me
Pic:
After I found them, the instructions said to REVERSE the rear engine bolt's direction and insert it from the opposite side. Then it threaded right in and the left rear rail acted as a nut.She's on now.. silly me
Pic:
Similar threads
