Best (most visible) Head and Tail Lamp Modulators

[Shinobi'sZ]

I sold my bike after getting hit by a truck in 1989...before the helmet law went into effect in Cali. Luckily I heard the truck skidding, turned my head to see it and pushed off the front bumper, off the bike, and stood there as I watched my bike go sliding on it's side 50 yards and the driver of the truck skid into a ditch on the opposite side of the road.

I was making a left hand turn into a driveway on a 25 mph street with a double yellow line. The driver of the 3/4 Ford decided to pass me as I was doing so..he claimed he was doing 25 mph but had at least 50' skid marks.

Anyway he claimed he didn't see my signal. I want to make sure I am seen and am looking for the best visible head and tail lamp modulators on the market...money no object. I got lucky walking a way from my last accident...I may not got so lucky the next time..so would rather make myself as visible as possible when braking and signals are applied.

Thanks

 

[Commuta_Busa]

just remember you should still consider yourself invisible even with the most visible lights/signals. They're of little help when the person may be texting on their phone.

 

[lil charlie]

Call Pahnit (one of the board sponsers), I got my tail light modular from him and it is very bright. Go HID on the headlight.

 

[Shinobi'sZ]

Call Pahnit (one of the board sponsers), I got my tail light modular from him and it is very bright. Go HID on the headlight.

Thanks for the constructive info. Are people having issues with HID burning up wires?

 

[Sous]

Thanks for the constructive info. Are people having issues with HID burning up wires?

No, the HID is actually running less power than the stock bulbs in most applications.

 

[wht_scorpion]

Go with 35watt unit 5000k bulbs for the low beam 10000k for the high beam go clear Leds for the rear tail lights

 

[Shinobi'sZ]

Go with 35watt unit 5000k bulbs for the low beam 10000k for the high beam go clear Leds for the rear tail lights

Any issues running these?

 

[InlineR]

LEDs need a flasher mod or they'll blink so fast it looks like there stuck on.

 

[Gpr1200r]

I am currently looking at the same mod. Here is a link to one of the board sponsors. Buy Now: Lighting modules for Motorcycles - Headlight Modulator, Back Off, Diamond Star | Pashnit Moto for more info.

 

[IL_Bow_Man]

My bike came with an integrator and the stock tail light. My girlfriend just doesn't think it is bright enough. I saw where someone said white LEDs to make them brighter. Where does one get the brightest led as a replacement. I think I have the led blinker module laying around already.


Sent from my iPhone using Tapatalk

 

[twotonevert]

I added two led strips on my tag, combined with my tail light it is pretty bright. Plus the strips blink when I hit the brakes.

 

[dx3]

I added two led strips on my tag, combined with my tail light it is pretty bright. Plus the strips blink when I hit the brakes.

You can't say this and then not post pics

 

[illuminati]

This is he conversion kit I installed on my busa. The turn signals have been converted into brake lights with the turn signals integrated into the brake light. The brake light flashes 20 times in 2 seconds and then stays solid. I find that cars notice me ESPECIALLY when I'm stopping at a red light. I usually have cars stop atleast 25 feet behind me.

Let me know if you're interested in the conversion.

 

[twotonevert]

You can't say this and then not post pics

Do you one better, how about video?

 

[Djxtrodinaire]

I had a backoff xp on my M109R and am about to install one for the B-King

Once you apply the brake it will flash fast 5 times and 1 solid. It will cycle over and over if you have the brake activated. If you're stopped at the stop light and let go of the brake, the brake light will keep flashing slowly until you start rolling again and it will stay solid.

I think its worth the money.