Brett Rahn
Registered
Guys I have a new Ti winder i just installed on GEN 2 hayabusa, and have a small issue that i need some help with, When the pipe is installed it just touches the oil filter where the factory crimps them at top, I have the oil filter relocator kit on it so I dont have to drop pipe everytime I do an oil filter, I have tried everything I have taken this dam thing off like 6 times, and they are a real pain in the arse to get on, exspecially the 3-4 pipe, it does not want to go into the head area at all , i really had to pull down and jam it into the holes, the 1-2 pipe goes in like butter, but the 3-4 pipe sits on top of 1-2 pipe and just is nasty,
Do you think it will hurt if it just touches ever so slightly, I have taken springs off and it pushes away but soon as i put springs on it pulls it back into oil filter, I know someone will say try to move muffler etc. I have it all the way forward and tried this thing several times over 4 days and I have no more ideas, I am out of ideas and patience, for 1695.00 this thing should fit, Also I fire it up and have no leaks anywear so I know I am on the money with the install, Please look at pics and give me your thoughts Brett. Thanks guys
Do you think it will hurt if it just touches ever so slightly, I have taken springs off and it pushes away but soon as i put springs on it pulls it back into oil filter, I know someone will say try to move muffler etc. I have it all the way forward and tried this thing several times over 4 days and I have no more ideas, I am out of ideas and patience, for 1695.00 this thing should fit, Also I fire it up and have no leaks anywear so I know I am on the money with the install, Please look at pics and give me your thoughts Brett. Thanks guys
