Can i run 9's with these mods

[07vigorblue]

Im wondering if its possible for me to get in the 9's with my weight and current mods. Im wanting to get in the 9.7- 9.8 range

I weight about 275#'s fully suited

here are the mods

Full yosh TI

BMC race

Small airbox Mod

TRE

Schnitz tuned makes 175hp/103tq at the tire

Front will be strapped

Rear is slammed

Welded clutch mod

3 stock & 3 Schnitz 40# Heavy duty clutch springs

Slave cylnder support brack

17/43 gears

Shinko 190/50/17 003 U-soft rear

Stock arm

 

[killerrudy]

With a good rider(not knowing your skill level), I would say it would be close. Weight is what hurts the most. But I would say it could be possible.

 

[07vigorblue]

i have only been twice with a best of 10.43 with a 1.702 60'. that was before clutch mod and i was running an open header and it was tuned by schnitz i have since then went to full exhaust and had schnitz retune the bike more aggressivly

 

[BusaWizard]

A stock bike will run in the 9's, it's the rider, not the bike.

 

[07vigorblue]

A stock bike will run in the 9's, it's the rider, not the bike.

not with a 275# rider it wont

 

[afterhours]

I would say no, not at your weight......

1.70 60 foots is pretty good for a stock wheelbase bike at your weight.....Problem is you will run out of steam at the big end.

1. lose some lbs. (cheapest)
2. fog the box

I am about your size, and you can ride the crap out of it on the first 1/8 mile, but the weight is really a factor at about 800ft to the finish....you need more hp.

 

[killerrudy]

Forget the diet.... Get boost!!

 

[07vigorblue]

Forget the diet.... Get boost!!

I would love too but i want to do it with the least mods as possible

 

[BusaWizard]

Seen it done.

 

[GMbusa]

You will get dam close. If anything, try a 16th front sprocket. Get an airshifter. Strip off any uneeded stuff of the bike. Have you removed the pair valve assy? That's around 10lbs right there.

 

[07vigorblue]

You will get dam close. If anything, try a 16th front sprocket. Get an airshifter. Strip off any uneeded stuff of the bike. Have you removed the pair valve assy? That's around 10lbs right there.

Have a 16t waiting if i cant do it with current gears and removed the pair valve about month after i got the bike

 

[lucky-dog]

I had the same setup and run 9.754@141mph, my 60ft was 1.556...I have run a best 9.689 thats with a tailwind at valdosta. My weight is 175.

 

[lucky-dog]

forgot to add with that setup I had 17/40 gear.

 

[dragonbusa]

I went 9.92 at memphis with a stock gen1 yosh pipe 16/40 and I"m 250lbs suited up

 

[ogre]

also depends on track and elevation, and how hard you can launch the pig, lol. seriously tho, weight loss is the best way. last year at this time i weighed in at 275, now i'm down in the high 230's, and getting lower every day. start running, i know it sucks and i hate running, but it's the best way (along with diet) that i've found to drop the lbs.

 

[Got-Busa?]

I went 9.92 at memphis with a stock gen1 yosh pipe 16/40 and I"m 250lbs suited up

Wheelie bar?

Have a 16t waiting if i cant do it with current gears and removed the pair valve about month after i got the bike

You are going to be very close.

You may need to run the 16 and add an air-shifter just in case.

That or try and get your weight over the front more so you can leave harder. 1.5-1.6 60' sure would help...

 

[djsin]

if your chasing me..you might

 

[ogre]

How about a quick shifter when you flash it?

Sent from my Droid using Tapatalk

 

[07vigorblue]

here is a link to my vids in the video section they are not that great of quality but they will do

https://www.hayabusa.org/forum/videos/142467-my-track-days.html

 

[afterhours]

I watched your vids....

your best run was 10.43...and you want to get to a 9.70. You need more HP, you can go up on the rear sprocket to help your 60 foots(I run a 50 tooth). you can switch to a Mickey Thompson Shootout tire(its lighter, less rotational weight) you can strip the bike to frame rails...and I still think you will be running 9.90's