Carmen Got Something New Today!

[nitrousjunkie]

Here they are, compliments of Suzuki4life, They are quality inners,You just need to spend a little time fitting them. I need to spend about an hour more on each side, and I'll have them perfect! NJ.

 

[Cecil_Stringer]

Very nice.... more pics please

 

[chowan24]

How much NJunkie? And were did you get those levers?

 

[Pipefighter248]

Looks good NJ.

 

[nitrousjunkie]

Looks good NJ.

Thanks Nathan!

 

[nitrousjunkie]

How much NJunkie? And were did you get those levers?

The levers come from STmachine, the price you'll have to work out with Gary.

 

[nitrousjunkie]

Very nice.... more pics please

Thanks Cecil, will get more pics up tomorrow, I'll be right behind you soon with a VR Stage 2 Kit soon! NJ.

 

[Krieg]

What exactly are you having to do to get the inners to fit NJ?

 

[Pipefighter248]

Very nice.... more pics please

Thanks Cecil, will get more pics up tomorrow, I'll be right behind you soon with a VR Stage 2 Kit soon! NJ.

Dang. Some guys have all the luck.

 

[mjn]

That looks sweet NJ! dang, gotta add another thing to the want list!

 

[nitrousjunkie]

What exactly are you having to do to get the inners to fit NJ?

Krieg, I'm guessing when they lay up the fiber and resin, there is some overhang or excess, this extra material has to be removed,by hand! I used a dremel, its a slow process, but it was too hot to ride so I needed something to do.NJ.

 

[johnstein]

lookin sweet ! levers lookin good too !

 

[sageronin]

Excellent NJ. those look great ... no doubt Gary/S4L hooked you up nicely.

 

[nitrousjunkie]

Excellent NJ. those look great ... no doubt Gary/S4L hooked you up nicely.

Thanks DJ, You've got a nice page! I need to do that sometime.Paul.

 

[DR1300R]

Kool for shore..

 

[Krieg]

What exactly are you having to do to get the inners to fit NJ?

Krieg, I'm guessing when they lay up the fiber and resin, there is some overhang or excess, this extra material has to be removed,by hand! I used a dremel, its a slow process, but it was too hot to ride so I needed something to do.NJ.

What brand are they and do you know where your buddy origionally got them? So they will fit nicely with a little work though? I am thinking of going with a set now to match my can.

 

[DR1300R]

What exactly are you having to do to get the inners to fit NJ?

Krieg, I'm guessing when they lay up the fiber and resin, there is some overhang or excess, this extra material has to be removed,by hand! I used a dremel, its a slow process, but it was too hot to ride so I needed something to do.NJ.

Thats what I like to read.. Instead of knocking the poduct look at the brighter side.. NO problems just solutions right NJ. BTW can't wait for more pics, there looking good NJ.

 

[GJoker]

Very nice.... more pics please

Thanks Cecil, will get more pics up tomorrow, I'll be right behind you soon with a VR Stage 2 Kit soon! NJ.

Dang. Some guys have all the luck.

..and then some!

Levers looks good, NJ.. congrats!

 

[nitrousjunkie]

What exactly are you having to do to get the inners to fit NJ?

Krieg, I'm guessing when they lay up the fiber and resin, there is some overhang or excess, this extra material has to be removed,by hand! I used a dremel, its a slow process, but it was too hot to ride so I needed something to do.NJ.

Thats what I like to read.. Instead of knocking the poduct look at the brighter side.. NO problems just solutions right NJ. BTW can't wait for more pics, there looking good NJ.

Thats right DR, I knew ahead of time the fit wasnt perfect, but the again, they arent $650 either! I dont mind working on my bike, You get to know whats going on with it inside and out. NJ.

 

[Smoke_Dog]

Looks awesome! Post a picture from behind the tank. Please!