Chain guard/license plate

[Busa04]

Any of you guys bought this exact model for a busa with dual exhaust? if so how did it fit and do you have a pic to share?

thanks joey

item# is 4621433860  


you will have to go to ebay and enter item number to view, sorry about that but when i entered it as a clickable link it went to a invalid site, i tried to cut and paste the url from the exact page but it didnt take me to it when i posted this...sorry about the inconvienence. I appreciate any feedback on this



<!--EDIT|Busa04
Reason for Edit: None given...|1145990836 -->

 

[Hoopech1]

I have this item (or something very very similar to it) and have a dual high mount-no problems. The hardware is 2 allen screws, so you will only need a little room for install, but they do not send nuts for the plate attachment, so keep your current ones or else you will have to buy new-and you need 4 total, but I am getting by with the 2 now. Now on the stock dual, I am not sure as they are quite a bit lower than the high mounts...

 

[arey]

I had a similar one that I got from jda custom. It cracked were the license plate starts. I send it back to them & waiting for them to call me back.

 

[Busa04]

any pics you could share?

thanks joey

 

[Hoopech1]

I have a problem uploading pics, but I'll try again.

 

[BiG-T]

I have a problem uploading pics, but I'll try again.

Check the size of the pic. I had the same issue and remembered I had to resize it.

 

[Hoopech1]

I also have a brand new (never installed) tag relocator that goes behind the rear axle bolt-you would just have to loosen the bolt, put the tag relo on and tighten it back up. No clearance issues even on stock. Let me know.

 

[bacharles]

I think VaBusa (Michelle) has a similar setup on her bike. She has stock exhaust with a bracket that her husband fabricated.

 

[Busa04]

now keep in mind the one i am referring to is the combo chain guard/tag relocator......not just the axle tag relocator......and i would like to see a pic of it installed on a busa with duals ( not high mount)


thanks.....joey



<!--EDIT|Busa04
Reason for Edit: None given...|1146086759 -->

 

[Hoopech1]

sorry I can't help then...

 

[BiG-T]

now keep in mind the one i am referring to is the combo chain guard/tag relocator......not just the axle tag relocator......and i would like to see a pic of it installed on a busa with duals ( not high mount)


thanks.....joey

Something like this....?

 

[CorrodedAlien]

? does it come in black?

 

[BiG-T]

?  does it come in black?

Affirmative.

 

[Busa04]

Big-T
thanks for the photo....do you have one from the back with the duals in the pic? and my bike is not stretched or lowered which changes the appearance and location of it.....

thanks joey



<!--EDIT|Busa04
Reason for Edit: None given...|1146175090 -->

 

[BiG-T]

Big-T
thanks for the photo....do you have one from the back with the duals in the pic? and my bike is not stretched or lowered which changes the appearance and location of it.....

thanks joey

I don't have any other pictures.

I pulled that off the net. (1tail) That is the only one I've seen that combines the tag holder and the chain gaurd.