Clock no workey

[reiny]

I tried changing the time on my clock.I pushed in the top button for a good 7-8 seconds and nothing happens.I think the clock doesn't work.My Busa is an 06 with only 8k on it so this seems kinds odd.
Anyone else have this problem?
Thanks in advance.
Reiny

 

[BigBSBusa]

Does it advance time every minute or is it stuck on the same time?

 

[reiny]

its stuck, it doesn't flash or change at all.

 

[99'busa]

mine no worky either but mine does advance..i just cant set it..i have to reset it by unpluging the battery at 12:00

 

[vincent]

turn key to on position.
put engine kill switch to run position.
hold top button for 7-10 seconds.
push to advance time, hold to advance faster.
once you have the correct time, wait 7-10 seconds then push top button again.

 

[kml]

Me too.
Clock no workie.
button feels stuck in.
oh well.


cheers
ken

 

[00Busa]

Spray some electrical cleaner around it and work ( in/out ) for a couple of seconds with the switch off. I've had to do this on 2 different Busas and they both started back being adjustable again. It finds it way to the circuits some way.

 

[kml]

Spray some electrical cleaner around it and work ( in/out ) for a couple of seconds with the switch off. I've had to do this on 2 different Busas and they both started back being adjustable again. It finds it way to the circuits some way.

good idea.
thanks!

cheers
ken

 

[reiny]

Thanks for all your replies! i will do as suggested and report back!

 

[jokerjoed]

turn key to on position.
put engine kill switch to run position.
hold top button for 7-10 seconds.
push to advance time, hold to advance faster.
once you have the correct time, wait 7-10 seconds then push top button again.

+1

 

[reiny]

turn key to on position.
put engine kill switch to run position.
hold top button for 7-10 seconds.
push to advance time, hold to advance faster.
once you have the correct time, wait 7-10 seconds then push top button again.

+1

This did work for me,however, I had to remove the little rubber grommet that u press and i used a 1/4 " dowel to stick inside and press the clock button.I just put a new rubber grommet on because i wore the original one out from impatience , i think?
It's tru you do have to press and hold and be patient.
Thanks all for your help!