Clutch judder when trying to pull off quickly any advice please

[phatray]

Hi All
When I try to pull off quickly from a standing start, the clutch on my 99 busa feels like it is sticking and I end up riding this bucking bronco till I shify up, been reading up on forums etc and there seems to be lots of different things, but nothing specific enough, so any help would be greatly appreciatedlease:
I am in the UK so any mods/kits are few and far between, would a new set of plates and heavy duty springs cure this or is it more of a design fault.

 

[StromBusa]

Does it get better when it warms up? Did you change oil type?

 

[Gixx1300R]

you need a clutch mod. The stock Busa has a 2 peice slipper type clutch. You can buy a billet one or one that has been welded. I have a used one for sale and can ship to the U.K

 

[phatray]

Makes no difference if shes cold or warmed up and the oil hasn't been changed.

 

[phatray]

Hi there, Ive read that it is posible to lock the back end up when coming down the box with this set up is that true, I wouldn't say I ride hard but this kinda worried me a bit.

 

[GIXERHP]

How many miles are on the bike?
Also has it been raced?

 

[phatray]

Only 23k miles on clock and as far as I am aware it may have only seen a few track days.

 

[Kiwi Rider]

https://store.schnitzracing.com/car...ion-lock-ring-suzuki-gsx1300r-hayabusa-99-07/
Have a look at this, may just fix your problem.

 

[202mphbusa]

Usually caused by a Scored inner hub
https://store.schnitzracing.com/mtc-billet-inner-clutch-hub-suzuki-gsx1300r-hayabusa-99-15/

 

[RansomT]

Or a couple of burnt steels near the hub.

 

[POWERHOUSE]

Bring out your dead . . .