Clutch Mod

[Deez ballz]

Hi,

I want to install heavy springs for the clutch on a gen 2, but i also have a Brock's performance clutch mod on with spacers for the spring.
So the question is do i install the heavy springs with the spacers or without it.

 

[ItsDooomz]

Without....

 

[Deez ballz]

thanks

 

[Vanishing Point]

Install clutch slave support bracket over sprocket cover

 

[Mr Brown]

Install clutch slave support bracket over sprocket cover View attachment 1616454

Sound advice right here.

 

[Nastee]

Yes with the heavier springs if released hastily it snaps back & is very audible; it will crack/break housing on opposite end (without support) pictured above.

 

[Deez ballz]

Install clutch slave support bracket over sprocket cover View attachment 1616454

What brand is that ???

 

[ColdBusa]

You could get a case saver/slave support from RCC Turbos. Does both, the one above is only for the slave support.

 

[Deez ballz]

You could get a case saver/slave support from RCC Turbos. Does both, the one above is only for the slave support.

Thanks guys I got one

 

[Berlin Germany]

@Deez ballz
@ColdBusa

could one of you pls. tell me / us the exact link to that nice piece (slave support) at their site (RCC) ?
i tried to find but wasn´t successfull

(am i too old / blind / stupid for finding that or is that site / shop built so dopey???)

 

[Deez ballz]

@Deez ballz
@ColdBusa

could one of you pls. tell me / us the exact link to that nice piece (slave support) at their site (RCC) ?
i tried to find but wasn´t successfull

(am i too old / blind / stupid for finding that or is that site / shop built so dopey???)

Billet Sprocket Cover and Case Saver for 08-20 Busa - RCC Turbos

rccturbos.com

 

[michael parris heuberger]

@Deez ballz
@ColdBusa

could one of you pls. tell me / us the exact link to that nice piece (slave support) at their site (RCC) ?
i tried to find but wasn´t successfull

(am i too old / blind / stupid for finding that or is that site / shop built so dopey???)

Hi. Look into Robinson Industries Output Shaft Support. It holds the output shaft from being pulled back,so the shaft does not crack the cases.

 

[Zee]

Billet Sprocket Cover and Case Saver for 08-20 Busa - RCC Turbos

rccturbos.com

250 just for the case

 

[busakiller]

I know this is old. Stiffer clutch springs are ok till 250 hp. After that get a single stage lock up if it’s a street bike. I
My clutch slipped with ape 60 pound springs. But I found away to make them hold more power but the clutch was stupid stiff.