Cracked Windsheild

fallenarch

THE SLOW RIDER
Registered
I have a Puig DB and love it. As most of you PUIG owners know they don't exactly fit great, at least on the 09. So I thought I would just switch out the rubber nut that comes stock to hold in the windsheild and go with another one that pulled things together nicely. I was riding the other day and I heard a loud "Pop"!. Stopped to look around the bike but all looked good and felt fine. Well when I got her back in the garage and took a good look at her I found this crack. Guess that's why it's not held in tight with regular bolts.

windsheild.jpg
 
Are you sure your upper cowl brace is not bent or twisted in any way?? I have not seen any screens cracking before you posted this? Some is either too tight, or not straight!
 
Are you sure your upper cowl brace is not bent or twisted in any way?? I have not seen any screens cracking before you posted this? Some is either too tight, or not straight!

I'm pretty sure it was the tighter bolts I used on it. I plan to buy another Puig to replace it.
 
Are you sure your upper cowl brace is not bent or twisted in any way?? I have not seen any screens cracking before you posted this? Some is either too tight, or not straight!

I had two of them break like this with no tight bolts, and only cleaned with Plexus. They were both a very tight fit and were definitely under stress while they were on the bike. Puig didn't seem surprised when I made a warranty claim. They gave me the impression that it was an issue specifically with the plain clear screens, not the smoked ones. Both of mine were clear.
 
Back
Top