curvas

puertorro

Registered
is hard to find some one who understand my english.
Lets try , my problem is when I inter in a turn I feel my bike sliding that happen when I take left and right turn but is more remarkable in the right side . I have no idea what the problem is

Thank you
1zhelp.gif




<!--EDIT|puertorro
Reason for Edit: None given...|1107723648 -->
 
not even sure if thats spanish or what...

babelfish says from spanish to english is

nesecito aid with my motor one so that when volume curved I feel as if the motor one slid and it went to me to fall my motor one is hayabusa 2003 if somebody can help me I go away them to be thankful, bearing of the wheel of the front seem to be well[/QUOTE]
 
Welcome to the board.
cool.gif
I don't have a clue when it come to Spanish
blush.gif


Even after reading the Quote above I have not idea what is being asked.
rock.gif




<!--EDIT|jwcfbd
Reason for Edit: "I'm an idiot"|1107734714 -->
 
Let me break out my skills, I think what he's tring to say is that when he takes turns his rear tire feels as if it's going to skid. He also states that the front bearings feel fine & that he feels that theres nothing wrong with them. Bienbenido al Board.
wink.gif
 
Let me break out my skills, I think what he's tring to say is that when he takes turns his rear tire feels as if it's going to skid. He also states that the front bearings feel fine & that he feels that theres nothing wrong with them. Bienbenido al Board.  
wink.gif
is hard to find some one who understand my english.
Lets try , my problem is when I inter in a turn I feel my bike sliding that happen when I take left and right turn but is more remarkable in the right side . I have no idea what the problem is
 
Welcome to the org!
cool.gif


What kinda tires are you running on your bike? How's your lean angle?
Could be you lean more to your right and are taking it right to the edge of your tire.. thus causing it to slide more on that side~ Could also be that your tire pressure is way too high~ It's really hard to say~ Check your pressure and maybe try a stickier tire compound.. like the Diablos or the Pilot Powers..
cool.gif


cool.gif
 
Welcome to the org!
cool.gif


What kinda tires are you running on your bike? How's your lean angle?
Could be you lean more to your right and are taking it right to the edge of your tire.. thus causing it to slide more on that side~ Could also be that your tire pressure is way too high~ It's really hard to say~ Check your pressure and maybe try a stickier tire compound.. like the Diablos or the Pilot Powers..
cool.gif
My Bike´s tires are bridgestone front BT56F 120/70/17 and rear BT56R 190/50/17 and have 2500 miles on it
I will check the air pressure ,the hayabusa service manual that I had said 42 psi.
Thank you very much for your help
race.gif


cool.gif
 
does this happen all the time or just when you start out?  If it only happens you first go you may just need to let your tires warm up more. With 2500 miles on the tires they should be worn in and clean but there may still be some traces of the mold release agant left on the tires.  Make sure there isn't any kink of oil on the tires.



<!--EDIT|jwcfbd
Reason for Edit: None given...|1107734616 -->
 
does this happen all the time or just when you start out?  If it only happens you first go you may just need to let your tires warm up more.  With 2500 miles on the tires they should be worn in and clean but there may still be some traces of the mold release agant left on the tires.  Make sure there isn't any kink of oil on the tires.
I notice the problem two time at the same day , after this I afraid to take turn like that again . Im not saying that Iam speedway racer but here in Puerto rico we have a lot of turn in every road

Imagen_001.jpg
 
Welcome to the board. Make sure to warm up your tires before you push them too hard.
 
Que tan gastadas estan las llantas? Yo creo que 1. Las llantas estan muy gastadas y no tienen buena traccion, o 2. Estas acostando y acelerando la moto mucho cuando estas en la curva (la hayabusa patina MUY facil, especialmente cuando uno acelera muy duro en primera o segunda). Trata de tener el clutch undido cuando vas a voltear. Si no cambias de velocidad y das la vuelta suave, no deberia patinar la llanta. La temperatura tambien podria tener algo que ver. Cuando esta haciendo mucho frio, las motos no tienen buena traccion.
Espero que esto te ayude. Ah si, y bienvenido al foro!
 
I'm from Puerto Rico too, Although I have posted just a few I 've been on the board on a daily basis. So here I go in Spanish, Estabas en coamo o algo asi? Yo tu cambio ls gomas y me tardo un poquito menos en darle a la gas. si esta patinando de alfrente le estas dando muy rapido a todo y de atras muy duro a la gas. las gomas estan tostadas? o todavia estan blanditas? Despues de un rato en la curvas agarran mejor?
 
Estos muchachos te tienen cubrido en cualquire aspecto, Bienbenido Al Org. Lo que mea fijado de este Foro, hay banstante Puerto Riquellos. Yo soy de El Salvador.
 
I'm from Puerto Rico too, Although I have posted just a few I 've been on the board on a daily basis.  So here I go in Spanish,  Estabas en coamo  o algo asi?  Yo tu cambio ls gomas y me tardo un poquito menos en darle a la gas. si esta patinando de alfrente le estas dando muy rapido a todo y de atras muy duro a la gas.  las gomas estan tostadas? o todavia estan blanditas?  Despues de un rato en la curvas agarran mejor?
pues claro que fui a coamo estaba super lleno estuvimos poco rato por lo lleno que estaba y nos fuimos para ponce a la guancha por la carretera vieja para detenernos a tomar algo ya tu sabes a secas no se puede , Si Dios lo permite se acerca el dia nacional del motociclista en la pista de salinas veremos como se da esta año tomenlo suave a todos los del .org y que viva las hayabusa caramba, y dale pa´bajo
all_coholic.gif
 
Back
Top