Did Clutch Mod Now Soft Lever.

Craiger

Registered
I just installed the Schnitz clutch mod kit put it all together and now the clutch lever is soft to the bar. The only thing I can think of that I might have done wrong was putting the transmission in gear while the pressure plate was off so that I could break loose the nut.
The fluid in the reservoir is lower but why? I hate it when stuff like this happens.
 
Take it apart and put it back together correctly, everything will be okay . . .
Thanks. I did take it apart and reassemble and I believe the clutch drive was not seated all the way to bottom. I'm able to put the tranni in and out of gear so I'm thinking that is the solution.
Thanks for the straight up advice Powerhouse.
 
Back
Top