Do I need a power commander?

[Cjbowler]

I have an 07 Busa with a full Brock handle exhaust. If so, is dyne tuning required?

 

[sixpack577]

No, it is not a NEED, your engine will run safely without it. Your bike will run better with a base map loaded in a power commander from Brocks, and it will run it's best when dyno tuned properly.
The ecu editor does alot more than a power commander too, if you have a dyno tuner close by that tunes with ecu editor that would be your best bet. There's alot of info on this site about it, and here's a link to their homepage.
boostbysmith.com - Home

 

[Sketchy_Camel]

What he said

 

[dadofthree]

to the oRg You have an 07, if you live in the US and have a US model I'm gonna say the bike is running lean and you need the PC or ECU edit to correct that because the bike won't.

 

[Cjbowler]

Thanks. I'm picking the pc3 USB up tomorrow. I'm new at this too.

 

[smac]

Save your money, don't buy a pc, just have your ecu flashed...

 

[mysql]

to the oRg You have an 07, if you live in the US and have a US model I'm gonna say the bike is running lean and you need the PC or ECU edit to correct that because the bike won't.

I just had my bike dyno tuned today. It has a full race exhaust, pc3 and a pc stock map that supposedly matched my configuration.

The results were that the bike had been running lean.

Here's the tuned results: