Doea anyone know the size of water bypass hose?

[JeffSyh]

I was putting my new front sprocket on an noticed a small nick in it I was wondering if anyone knew the inside diameter so I could change it quick without draining the coolant the part number is

17854-24F00​

Thanks!

 

[Berlin Germany]

hi @JeffSyh

i would recommend to get the original hose - not else one from else where

the original is, if i remember correctly, a bit pre-bent ? hmmmm

and at revzilla its prize is at only 16 bucks

and if you, when engine is cold, pull it off from the pipe at the cyl.´s connector (highest point in water circuit) you can
1st get its inner size (what you won´t need if you buy the original one )
2nd replace the entire hose easyly because there is no pressure in it, when engine is off & cold, and only a lill sip of water would drip out
if replaced quickly at the pump

good luck

 

[JeffSyh]

hi @JeffSyh

i would recommend to get the original hose - not else one from else where

the original is, if i remember correctly, a bit pre-bent ? hmmmm

and at revzilla its prize is at only 16 bucks

and if you, when engine is cold, pull it off from the pipe at the cyl.´s connector (highest point in water circuit) you can
1st get its inner size (what you won´t need if you buy the original one )
2nd replace the entire hose easyly because there is no pressure in it, when engine is off & cold, and only a lill sip of water would drip out
if replaced quickly at the pump

good luck

Thanks but the orginal will take over a week to get and I plan on riding on Monday, the oem is just a straight hose no bends.