Easy Way To Remove Stickers?

[piratediverjefff]

Hi guys,

Just brought my new 2011 home yesterday and ready to get after all those damned stickers,anyone have a miracle process or do i get out the old hair dryer?

 

[BusaBret]

The biggest pain is the one on the tank. Best advice for it is PATIENCE!!!!

sent from my dunce stool via Tapatalk

 

[sixpack577]

Heat gun, and citrus based organic degreaser(several brands out there).
A little paint reducer works great too.

 

[piratediverjefff]

It's been 8 years since my last new bike and if i remember right they were a royal pain also,will try a little of everything.

 

[lil charlie]

Hair dryer or heat gun with goo gone or wd40 for the sticky crap left behind....then pledge her for a nice shine

 

[Tyron]

Heat gun to peel the sticker off.
Wax & Grease remover from your local auto store to get rid of the left over. BUT REMEMBER TO WAX AFTERWARDS!!!

Will come up like the sticker was never there...

 

[piratediverjefff]

Ok,got the 2 on the tank off(i bet that guy who puts these on at the factory gets a good laugh every time he plasters these things on),used a hair dryer and a plastic scraper/then a citrus based remover followed by some Mothers Scratch Remover(didn't scratch anything,but the black paint had some really fine swirl marks so buffed them right out).Now some wax and then i'll tackle the 2 on the side dash panels(i'd still like to strangle that guy).

 

[BusaBret]

The ones on the inners are easy peasy!!

sent from my dunce stool via Tapatalk

 

[Twobrothersbusa]

It's funny...you're looking to take them off and I worked so hard to get this one that I may never take it off.

 

[piratediverjefff]

It's funny...you're looking to take them off and I worked so hard to get this one that I may never take it off.

Congrats bro!

Yep,the two inners came right off.

Next is that fugly mudflap thingy and the reflectors(actually i just went for one of the rear reflectors and the screws came loose but wouldn't drop out,i suppose there are nuts inside that takes a contortionist to get at?...and same for the four-10mm bolts that hold the mudflap/lic. plate holder on?...i suppose every little thing is gonna fight me on this motorsickle.

 

[Blanca BusaLess]

This may work for you?

>>>> https://www.hayabusa.org/forum/gen-...t-fender-eliminator-tag-bracket-tutorial.html <<<<

 

[sixpack577]

Congrats bro!

Yep,the two inners came right off.

Next is that fugly mudflap thingy and the reflectors(actually i just went for one of the rear reflectors and the screws came loose but wouldn't drop out,i suppose there are nuts inside that takes a contortionist to get at?...and same for the four-10mm bolts that hold the mudflap/lic. plate holder on?...i suppose every little thing is gonna fight me on this motorsickle.

The rear reflectors do have nuts on the top, but the 4 bolts that hold the mudflap on don't.
You do have to get your hands in a tight spot to unplug the tag light though.
Luckily the undertail does come off easy.

 

[coreywiley]

I use a heat gun!