FBG TETHER KILL ON 08 BUSA

[FLASHRACER]

WELL I WANT A TETHER KILL FOR 08 BUSA. ANYONE PUT ONE ON. FBG TYPE. I LIKE THAT STYLE BETTER BUT THE 08 HAS MORE WIRES COMING OUT OF THE SWITCH HOUSING. WASNT SURE IF THEY BE IN THE WAY.OR NEED TO MODIFY THE BRACKET.I KNOW PMR HAS ONE BUT THE WIRES ARE HIGH AND I WOULD LIKE FOR WIRES TO BE HID. THANKS

 

[Professor]

I've seen it.

Have you looked at the PMR? It replaces the clamp so it does not take up space on the bars or get in the way of the wires.
My opinion but I think it is a better looking unit and you can add a couple of switches if needed.

http://www.pmrcomponents.com/pmrweb_043.html

 

[Professor]

Opps. I just read your post again.  I ran some shrink tubing on my wires and they are noticable but not that bad. I'll get you a picture in a minute. I believe you could also run it upside down.

 

[Elganja]

I routed mine under the bars and to the harness. I used black electrical tape to cover up the spliced connectors and the area where I cut into the wiring harness.

here is a crappy pic of my vortex kill switch.

ImageShack Links Do Not Work

 

[BusaWizard]

 

[FLASHRACER]

I HAVE THE PMR WITH A SWITCH. IT JUST SEEMS TO BE A BIT TALL.