I finally took the pics of a FIAMMM DUAL AIR HORN INSTALL for those interested. There loud as heck and no bugs/liquid can get to em. Easy install.......
I mounted the air compresser sideways with included mounting hardware at factory horn location. See pic #1
I mounted the short horn on the left near the relays/fuse box using a 1/2 inch U-clamp and included mounting hardware.
See pic #2.
I mounted the longer horn on the right. Used 3/4 inch x 1/16 x 4 inch piece of alum. Drilled and mounted it on the right instrument cluster bolt. Used included mounting hardware bolts for horn. Put small bend to mount horn then installed instrument cluster bolt. Next, lean on it to desired position.
I used 1/4 inch automotive hose for the lines. Better air flow and more flexible. (Free at local autozone. Too short to fool with 3 feet) Also tighter fit.
Mount relay on back of instrument cluster run wiring using factory horn wires. Use double sided sticky tape where horn lays on air tubes, and where horn rests against anything for a buffer. For added security used a zip tie around horn to instrument cluster brace in case it would ever come loose. Used zip ties to hold hoses to neck of instrument cluster bracing. Put a "BOW" in air lines as they pass upward to ensure clearance of front forks and steering dampner. Re-install front nose section.
Funny as helllll when ya hit em from a motorcycle. Real attention getter, also cagers tend to swerve away from ya. Sound is more than their used to hearing from a MC.
Just in case ya thought of it. ($20.00) from autozone. I used to have dual highway blasters but wanted the more Airy sound. A musical horn will fit there also. Three horns is a bit much but can mount on rear of headlight if you dont have an HID!
I mounted the air compresser sideways with included mounting hardware at factory horn location. See pic #1
I mounted the short horn on the left near the relays/fuse box using a 1/2 inch U-clamp and included mounting hardware.
See pic #2.
I mounted the longer horn on the right. Used 3/4 inch x 1/16 x 4 inch piece of alum. Drilled and mounted it on the right instrument cluster bolt. Used included mounting hardware bolts for horn. Put small bend to mount horn then installed instrument cluster bolt. Next, lean on it to desired position.
I used 1/4 inch automotive hose for the lines. Better air flow and more flexible. (Free at local autozone. Too short to fool with 3 feet) Also tighter fit.
Mount relay on back of instrument cluster run wiring using factory horn wires. Use double sided sticky tape where horn lays on air tubes, and where horn rests against anything for a buffer. For added security used a zip tie around horn to instrument cluster brace in case it would ever come loose. Used zip ties to hold hoses to neck of instrument cluster bracing. Put a "BOW" in air lines as they pass upward to ensure clearance of front forks and steering dampner. Re-install front nose section.
Funny as helllll when ya hit em from a motorcycle. Real attention getter, also cagers tend to swerve away from ya. Sound is more than their used to hearing from a MC.
Just in case ya thought of it. ($20.00) from autozone. I used to have dual highway blasters but wanted the more Airy sound. A musical horn will fit there also. Three horns is a bit much but can mount on rear of headlight if you dont have an HID!