Fitment Sicom and Gp4-rx?

[bigboy]

Im getting Sicom 330mm Rotors so which Gp4-rx Calipers do I need.I have two different Part numbers #220B01020 OR #220B01010

Believe the first number is 100mm
The second is 108mm.
I have a 2009 Busa Also @ROADTOAD1340 remind me of what I need for my rear?

 

[ottafish]

I reckon the 108 is what you need. Seems to be the standard for Japanese bikes. I think the 100 is more your European bikes.

For the rear you need the underslung bracket and I think the p32 caliper

Been too long ago since I did mine

 

[Dai.]

Running oversized rotors means you’ll need some adapters and longer bolts for the calipers to work.

108mm is indeed what you need, as Otta said 100mm is for Euro bikes.

P32 caliper, longer brake line and underslung bracket is needed

Are you in Australia?.

 

[bigboy]

Running oversized rotors means you’ll need some adapters and longer bolts for the calipers to work.

108mm is indeed what you need, as Otta said 100mm is for Euro bikes.

P32 caliper, longer brake line and underslung bracket is needed

Are you in Australia?.

No I'm in the USA. And I got the 108mm Calipers. Got a good deal for a used pair that also came with Ventilated caliper pistons For $1,155 shipped. Which brand new would have cost me around $1,800 before tax and shipping. Yeah I gotta buy longer titanium bolts. And clue what size I will need?

 

[Dai.]

If I remember correctly, spacers are 10mm longer therefore add 10mm onto the existing bolts.

 

[bigboy]

If I remember correctly, spacers are 10mm longer therefore add 10mm onto the existing bolts.

THANKs a jeep. Does anyone have a part number for the P32 rear caliper? And why tf does the bracket cost so much lol?

 

[Dai.]

Brembo - 20B85111

Yeah not sure why it’s expensive when there’s not much to it.