foot pegs???????

CycleCat is the only one I know that will go lower than stock, other than a couple of Drag only rearsets that would not be streetable.
 
The Buel pegs lower your foot position about 1 1/4 inches.

Left_Peg_complete_sm.JPG
 
I didn't notice when I first replied that this is in the 08 section.

From the photos, it appears they will work. I have not seen where anyone has done it yet.
 
The Buel pegs lower your foot position about 1 1/4 inches.
That does not seem like a whole lot.  I am of average height 6' 1" but am a little cramped on these sportbikes myself.  Does that inch and a quarter really make a difference?  And does it push you down and back, or just down?  Thanks for the info!
 
The Buel pegs lower your foot position about 1 1/4 inches.
That does not seem like a whole lot.  I am of average height 6' 1" but am a little cramped on these sportbikes myself.  Does that inch and a quarter really make a difference?  And does it push you down and back, or just down?  Thanks for the info!
Ask your girlfriend or wife if 1 and 1/4 inches makes a difference.lol
laugh.gif
 
The Buel pegs lower your foot position about 1 1/4 inches.
That does not seem like a whole lot.  I am of average height 6' 1" but am a little cramped on these sportbikes myself.  Does that inch and a quarter really make a difference?  And does it push you down and back, or just down?  Thanks for the info!
Ask your girlfriend or wife if 1 and 1/4 inches makes a difference.lol
laugh.gif
rofl.gif
Oh, I can feel that one burning from over here! It just pushes you down. Kinda like Boosted just did to you.
 
The Buel pegs lower your foot position about 1 1/4 inches.
That does not seem like a whole lot.  I am of average height 6' 1" but am a little cramped on these sportbikes myself.  Does that inch and a quarter really make a difference?  And does it push you down and back, or just down?  Thanks for the info!
Im 6'4" and I could tell the differance on Hal's bike and he is onlt using TL pegs.
 
Just put buell pegs on my bike and it makes a big diff . The only thing is You have to grind them alittle and then adjust your shifter and brake pedals.
 
Swapping pegs only, the Buell.
Where you getting those from Rick?
Mine has Protek pegs on it that are about the same height as the TL.  

I'm thinking about going to a buell peg at the track.

GX1300R sells a modded set ready to bolt up in the for sale section here that are nice or you can order a set at HD for about $30 and mod them. I believe it is HD part number N00006.1AD.  You'll also need some GM S-10 door bushings or machine a bushing.
 
Back
Top