Free Dyno Tomarrow

[BUSANAS]

I just got my PCIII pre-programmed today for my exhaust and I am getting a free dyno tomarrow. Is there anything I should know before doing this or anything I should do? Looking forward to seeing some numbers. I did a quick around the block test ride after installing the PCIII and the throttle seems a ton chrisper but thats all I noticed so far.

 

[onedownfiveup]

Yeah, spend the money to have a custom map made.

 

[AZIROC]

Yeah, spend the money to have a custom map made.

+1


ur already there, might as well c if u cant get little discount for a map

 

[Mospeada]

This may be coming in too late, but...

40 psi rear tire
fresh oil change (Mobil1 ftw!)
clean chain

And lastly, make SURE they print out an Air/Fuel ratio, then post that map on here. Should be about 13.2/1 all the way across.

 

[BUSANAS]

Results are not what I expected.
STP Corrected Wheel Power Superflow WinDyn V2.4
wp=144.7
tq 83.7

DJWhPw=153.0

I dont know AFR as they did not do that.. I dont know why. The guy said that he dyno'd an 08' busa with exhaust and I was right there with it so... I dont know seems a bit low for a full exhaust and PCIII. The hp and tq lines are nice and smooth though.

 

[Sloto200]

153 more a stock busa number... me thinks this guys dyno is putting out low numbers, especially when he said an 08 busa has the same numbers...

 

[99'busa]

sounds wierd

 

[BUSANAS]

New information
My buddies went to the same dyno today
04' R6 Micron Slip on 88.X hp
07' CBR1000RR Two Bros slip on 133.X hp

I believe these numbers look correct but that only makes my numbers look more out, only 11hp more than a 1000? But I plan on hitting a different dyno up sometime soon as another dealer is going to start doing bike night/show/dyno and is only going to charge $10 for a dyno. BTW went last night to the same thing and won a $75 gift certificate

 

[Professor]

Results are not what I expected.
STP Corrected Wheel Power Superflow WinDyn V2.4
wp=144.7
tq 83.7

DJWhPw=153.0

I dont know AFR as they did not do that.. I dont know why. The guy said that he dyno'd an 08' busa with exhaust and I was right there with it so... I dont know seems a bit low for a full exhaust and PCIII. The hp and tq lines are nice and smooth though.

Same thing mine did on a DJ250I with a Yosh pipe.

 

[dave3.4]

the new 1000's are putting down some seriuos power these days