Front sprocket torque not good!

[vinnycr2]

Putting a new chain and sprockets on. When I went to change my front sprocket I got ready for a good tug on the ratchet and almost fell on my face when the sprocket nut loosened with about 10 to 15 lbs of torque. Maybe even less than that.

I could have loosened it with one finger on the ratchet!

The speed sensor was basically holding the nut from coming loose!

At least that was still tight.

 

[BigBSBusa]

Thought this was going to be much worse. Glad you found it and got it fixed.

 

[stlbusarider]

use locktite and it won't come back off

 

[BA BUSA]

Torque it to 105 ft lbs and use some blue Loctite