Front sprocket

[Wolfman]

Ok guys. I was wanting to swap out the front sprocket myself. The catch is no air tools. So I was wondering if anyone has swapped it out with good old fashioned putting some @$$ behind a wrench. So what do you guys think...Can it be done?

 

[Pipefighter248]

Can be done.
32 MM socket on the front sprocket.
Will be tough, use your 1/2" drive rachet and maybe a cheater for more leverage also.

 

[ranman]

also if no cheater bar use a rubber malet to smack the wrench. a poor guys inpact wrench.
and just remember how everything came apart to put back together.
good luck you can do it

 

[Wolfman]

Is there a certain torque setting I need to put the new sprocket on, or do I just give it everything I got?

 

[ranman]

105 lbs
this is the link to the online manual

 

[psycobusa]

leave the chain on and place a board or something similar through the rear wheel to keep it from turning when you turn the wrench

 

[300Busa]

leave the chain on and place a board or something similar through the rear wheel to keep it from turning when you turn the wrench

+1  or just set the parking brake.  

<!--EDIT|300Busa
Reason for Edit: "typo"|1153090836 -->

 

[ozz]

just did it today so yes it can be done but its a ##### give her some ass and she will go

 

[Wolfman]

Thanks guys. I have duty today (stupid navy) but I will swap it tomorrow.

 

[ks-waterbug]

No problem....