I need to see if any Gen 2 owners would tell me how I go about setting the clock on my 08. I couldn't get it to set for me. Thanks in Advance! 
Gen 2 Clock
- Thread starter NINJA KILLER
- Start date
If your looking at the Gauges , Is it the button on the right ?
Bike didn't come with the Manual when I got it.
I tried both buttons , But it wouldn't flash to set .
You're supposed to be able to dim/brighten the gen2 dash lights too, according to the manual, but mine never worked. I asked the dealer, they didn't evn know it was supposed to.
headrash
Registered
A little different from Gen1 , Thanks Bro
I finally was able to help someone on here 
The gauge lamp brightness cannot be adjusted. Manual is a little misleading. It is the shift lamp which is adjustable.
I posted the procedure and it is pinned. It will take you through setting the shift lamp.
I think it was deleted, here it is:
1. Press and hold the select button (left).
2. Turn the ignition on, continue to hold the select button down until
the instrument panel boots up .
3. Release the select button
4. Press the adjust (right) button one time.
5. A symbol that resembles a lightning bolt will appear.
6. Pressing the right button again will toggle through the shift light
settings--- on, flash or off.
7. Press the adjust (left) button again... one time.
8. Little dots/squares appear - this is the brightness setting for lamp.
9. Press the right button to add more dots - more dots brighter lamp.
10. Press the adjust (left) button again- tach needle will move to
default setting.
11. Press the right (select) button to move the tach needle to setting
you want.
( it moves 500rpm at a time below 8000 rpm, 250 above 8000 rpm)
12. Press the left button again to exit out.
shift light
Hope that helps. The manual is not very good at explaining shift lamp settings.
Similar threads
