Hard racing rear tail lights

[diablotoona]

Is anyone using these? Looks pretty slick to me, just curious what the quality and install was like?
Any input?
http://www.hardracing.com/Clear%20Tail%20Lights/ClearHOME.htm

 

[TurboSN95]

I want one!

I emailed them to see what the difference is with the two part numbers: CTL-0018-INT and CTL-0018

Anyone have this taillight? I'd like to use this with the Extreme Graphics undertail that uses the stock brake light.

 

[dinoap]

That taillight is made by Clear Alternatives and I have one on my ZX6E and the fit was perfect. I think the difference between the two #'s is the one with "INT" in the part # has the turn signals INTegrated into the tail light and the other does not. I have the non integrated one on my Ninja and I like the look, haven't decided if I want one for the Busa though, post pics if you get one.

 

[dinoap]

I bought some turn signals made by Clear Alternatives and I love em, they even came with a new electronic flasher that slows the flash rate down to a more acceptable level.

 

[dinoap]

One more

 

[TurboSN95]

Ahh thanks, yeah Clear alternatives has the whole housing, nice!!! And they sell the clear front signals too so i might as well buy those there as well.

Anyone know how the 'chrome bulbs' look with the front clear signals ?

 

[TALYN]

Those are sweet......

 

[diablotoona]

Cool cool, I am ordering one up as we speak.

 

[diablotoona]

Part number was:
Product # CTL-0018-INT
Product LED Suzuki Clear Tail Lights, '99-'05 GSX-R 1300 BUSA

They come with the turnsignals installed already.
Ill get some pics once i get them installed.

 

[TurboSN95]

Well, I ended up ordering the front clear turn signals, and the rear taillight in smoked clear, both made by Clear Alternatives.  I'll post up my experiences with the whole process.

 

[kairles]

(TurboSN95 @ Nov. 22 2006,07:52) Ahh thanks, yeah Clear alternatives has the whole housing, nice!!!  And they sell the clear front signals too so i might as well buy those there as well.  

Anyone know how the 'chrome bulbs' look with the front clear signals ?

I wish that was true. I have the clear alternatives kit waiting to go on my bike. you get the LED circuit board, with an 1157 plug for the tail light, two wire for the intergrated turn signal, 2 resistors to slow the  blinking rate of the LEDs down to the stock rate, and a lens of your choice. I choose stock clear.

this is what you get

 

[TurboSN95]

Well, I got my clear front signals, and smoked rear lens and LED setup from Clear Alternatives. Kairles - you were right, it wasn't a complete taillight setup like I was led to believe... but so far I slapped the rear lens on and it looks nice. Sorry for the crappy picture, my camera seems to hate reflectors and license plates.

Now I gotta find a thread on how to get the front turn signals swapped out.

 

[heavybusa]

I have the silverstar "chome" bulb with smoked lenses.

But I'd like to do a brighter LED all the way around.

 

[TurboSN95]

Just realized how easy it was to put the LED setup in... the signals will be more time consuming, that's the winter project. But it looks real clean.

 

[TurboSN95]

with brake light on

 

[kairles]

smoke gos good with that color

think to get the front signal you have to remove the panels

 

[TurboSN95]

(kairles @ Nov. 29 2006,20:13) smoke gos good with that color

think to get the front signal you have to remove the panels

Thanks! And yeah, I think the signals will be a winter project.

 

[diablotoona]

I got mine and installed it last night, I installed the turn signals too. One thing I had to do was find a set of rubber grommets to place in the led boards holes so it would not move around once the lens was put back on, dont know if they missed that in the kit or what but the install was pretty simple i also used the resistors for the turn signals they still blink quicker than before but it is acceptable, ill post some pics later once i get back to the garage.

 

[diablotoona]

Some pix

 

[diablotoona]

lights on