help 24mm allen wrench

[jbv9exj]

were do i find a 24mm allen wrench for my front axle

 

[busabeast]

i use a bolt and a couple nuts for gripping... otherwise- napa

 

[BlueHaya]

I used 2 5/8" nuts and bolt.


borrowed pic

 

[teddypenn]

u use the nut and bolts method, too. you can pick up the "correct" tool at cycle gear though, for about 20 or 30 bucks

 

[Fastfrog007]

A thread rod coupler from the hardware store works too. Search hayabusa from wheel tool on eBay for a pic of it then hit up lowes
Droid via Tapatalk

 

[Rainbow7]

Axle Hex Tool 17mm 19mm 22mm 24mm motorcycle remove nut | eBay

Looks similar to this:

 

[busa186]

A thread rod coupler from the hardware store works too. Search hayabusa from wheel tool on eBay for a pic of it then hit up lowes
Droid via Tapatalk

+1

15/16th ... I think.
Posted via Mobile Device

 

[RYC1966]

In addition to the double nut deal It might help to drill a hole in the flat of the nuts (1 per nut) and pound a pin in it (crosssectio). Not necessary but the pins keep it locked in...it could be welded to.