help fueling

[ctbusa]

I installed an inline pump and rising rate regulator the bike started first time and ran like a dream after a while it started splattering then it cleared up and pulled like a freight train then splattering again this happend al the way home when I got home I lifted the tank and there was what looked like water in the vacuum pipe that leads to the regulator I'm close to lighting it on fire
Posted via Mobile Device

 

[Boosted Cycle Perf]

The water you see might be condensation, and the problem you described sounded like a pinched fuel line.

 

[ctbusa]

Is the condensation fine in the pipe
Posted via Mobile Device

 

[Boosted Cycle Perf]

It can happen depending on the location of the fmu, or where the hose is ran from

 

[ctbusa]

I checked the fp and it was on 54 psi instead of the 43 we set it at when you crank it you can smell the fuel it starts idel for a bit and then dies again
Posted via Mobile Device

 

[ctbusa]

got the news today regulator is shot cept on fouling the plugs time for a new better and more expensive one it just never stops

 

[lil charlie]

At least you got the problem figuared out.

 

[texas-buzzard]

get a RCC fmu and eliminate your problems.