help me with o2 sensor

[BehBehaNi]

hello

I've installed yoshimura rs-3 exhaust on my hayabusa
so there is no place for the o2 sensor on the mid pipe

so what can i do for the sensor ?

thank you

 

[Commuta_Busa]

you've got two options... have a bung welded in or get one of those delete plugs. The first option is the better one.

 

[BehBehaNi]

Thank you for the quick reply
Can I Make a hole on mid pipe and put the sensor ?

 

[Blanca BusaLess]

Thank you for the quick reply
Can I Make a hole on mid pipe and put the sensor ?

Yes you can . Make sure it is in approx same location as factory one was . A nice clean threaded hole not too close to engine/headers will work fine .

Assalamu alaikum

 

[BusaWhipped]

Thank you for the quick reply
Can I Make a hole on mid pipe and put the sensor ?

You should have a threaded bung welded in. The O2 sensor should sit a specific depth in the pipe to work properly. The bung will make sure its positioned properly. You can see the bung welded into my HMF highmount midpipe. Just putting a threaded hole in the midpipe will put the O2 sensor too far into the pipe.

 

[BehBehaNi]

Thank you all for helping me to o2 problem
i will make it

best regards