Help Removing Caps On Triple Tree?

[Sweeney]

Any advise on removing these bolt cap's on the handle bar holder?

I'm in fear of messing them up prying on them. (I think I saw a CDI Precision comment that he destroys them when removing).

Is this another Suzuki design challenge?

As usual, any advice appreciated!

 

[Pipefighter248]

Take a knife with a fine tip or screwdriver and just place it right below the cap and pry up on them.

 

[Big Red]

Fishing line

 

[Aquaman]

Dynamite!

 

[Sweeney]

Dynamite!

I used it all up removing the farringjavascript:emoticon('

')
smilie

 

[dadofthree]

I lost two of mine so far after removing them

 

[Tybalt71]

 

[Busapilot08]

You can buy new new ones from Suzuki for 1-2 bucks a piece if you damage them, probably won't send anyone to the poor house.

 

[jjmetheny]

You can buy new new ones from Suzuki for 1-2 bucks a piece if you damage them, probably won't send anyone to the poor house.

You mean 3-4 bucks a piece.

 

[Midlife III]

90 degree scribe or dental tool..

 

[BadWeather]

Butchered mine all but one

 

[Sweeney]

Take a knife with a fine tip or screwdriver and just place it right below the cap and pry up on them.

Sharp Knife was the best sugestion. Thanks!
Once I realized these caps are just on top of the bolts. It looked like they covered the sides & I was looking to the bottom....

Next prob..new post, my levers are hitting the farring inserts!

 

[Pipefighter248]

Take a knife with a fine tip or screwdriver and just place it right below the cap and pry up on them.

Sharp Knife was the best sugestion. Thanks!
Once I realized these caps are just on top of the bolts. It looked like they covered the sides & I was looking to the bottom....

Next prob..new post, my levers are hitting the farring inserts!