Help...roaring toyz swingarm tension bolt

[highestgrade]

Please share your advice on how to rectify this problem. i plan on replacing with stronger bolts...maybe just too much DAMN POWER!!! or is this a fault with roaring toyz swingarm???

 

[Mike C]

I did the same thing when I 1st put mine on. thought I had the chain adjusted right and went around the block and dumped the clutch and the wheel moved forward a little and bent the bolts. so since I am right down the road I went in and talked to Bobby at Roaring toyz and he gave me 2 new bolts. and havent had that happen again.

 

[ToXSicK RoCKeT]

WOW....... Thats Scarry ::9 Like mentioned above, I would definitely call and talk to Roaring Toyz about this. what method do you use to determine what your proper chain slack should be?

 

[highestgrade]

tension to average 0.5"-1" slack

 

[Evil_keeps_me_young]

what kind of bolt is that through the axle? looks like a grade 8 but whats it doing there?

 

[turbobusa2000]

Those adjusting bolts shouldn't have any pressure on them, they're there for adjusting only. I would say that the axle nut was not tightened properly. I wouldn't ride it till the problem is corrected.

 

[turbobusa2000]

what kind of bolt is that through the axle? looks like a grade 8 but whats it doing there?

Was wondering the same thing.

 

[dadofthree]

Stronger bolt required, but make sure you torque and pin that axle nut to the proper torque

 

[Gixx1300R]

This is how I do mine. Stock bolt on the bottom.