Help

[Hoopech1]

What should I do? I was replacing the stocker with Muzzy's and one of the three screws holding the stock fan to the housing stripped. I have two out but can't get the third. Any ideas on the next step? Thx.

 

[omslaw]

Ouch.

Are you able to get something under the head of the screw, like a small, flat-head screwdriver, to help pry the screw up while backing it out?

 

[MN72Busa]

Take a dremel tool, and use the cutt-off disc to put a notch in the head so you can use a small slotted screwdriver to back out the screw.

 

[Hoopech1]

Thanks guys-ill try both

 

[psycobusa]

or buy a screw extractor tool

 

[Hoopech1]

I couldn't get a flathead underneath, so I used the dremel method-worked like a charm! That little bugger popped right outta there. Needless to say I went to the store and got 3 new bolts-a little longer, a little stronger. Put it back together and everything is fine. Thanks for the help guys and thank God for this board!

Chris

 

[MN72Busa]

I couldn't get a flathead underneath, so I used the dremel method-worked like a charm! That little bugger popped right outta there. Needless to say I went to the store and got 3 new bolts-a little longer, a little stronger. Put it back together and everything is fine. Thanks for the help guys and thank God for this board!

Chris

Glad it worked out for ya