Idle adjustments

[TheJekyl]

Good afternoon. Have an '07 with 4800 miles, idle at warm has been floating around 800 and I've actually stalled a few times when teh clutch is in and pulling up to a red light (darn red lights). Anyway, how do I adjust for a '07 and what is the recomemnded idle @ warm? Thanks

 

[WuzzaCBXRider]

The search function may provide a picture. I use a very long screwdriver just above the right side fairing panel to reach the idle screw on my 06. Until you get it adjusted you can raise the idle by using the left hand throttle switch (its not a choke lever) just an idle raiser...

 

[BusaWhipped]

Idle should be set at 1150-1250 RPM. Here's the link to the post that was mentioned above

https://www.hayabusa.org/forums/?act=ST;f=24;t=80197;hl=

 

[twotonevert]

Good one Dennis. Not much I can say that will be any better than what has been already been stated. Its really easy. There is a mod you can do to put the thumb screw outside of the frame for easy ajustment. Or you can locktite the threads of the adjustment screw. Oh, and welcome to the board!

https://www.hayabusa.org/forums/uploads/post-24-16255-DSC03629.JPG

 

[Busa_70461]

talk to Vman1300(Kevin) at Mr.Cycles he can hook you up with an idle mod parts you need to adjust your idle whenever you want without a screw driver. I bought one for myself and another board memeber and we love them. Look at the sponsors page for the link or send him a PM.

 

[TheJekyl]

good info, appreciate the assistance.

 

[quirmche]

These links don't work!!!!

 

[Wag]

I wouldn't use loctite on the threads because you have to use that idle screw to set the rpms when you're synching the throttle bodies.

Just use a very long screwdriver.

--Wag--

 

[GSXcite]

Just as easy for me to prop up the gas tank. It's right there easy to get to.

 

[twotonevert]

Just as easy for me to prop up the gas tank. It's right there easy to get to.

Yeah, but that takes like, two minutes. Ok sorry, just kidding. I do the same Hal.