Ignition wire??

[Fatmanbru]

Has anyone found an ignition wire to hook a usb outlet to?

 

[chidago]

I did a fuse tap to the fuse block

 

[chidago]

That didnt say much..lol I wanted to avoid any can-bus communication BS, which hard wiring into circuits can cause, so, I found a switchable acc fuse, and ran a fuse tap to it, works great, use it to power my phone, and valentine 1 with no issues

 

[Fatmanbru]

That didnt say much..lol I wanted to avoid any can-bus communication BS, which hard wiring into circuits can cause, so, I found a switchable acc fuse, and ran a fuse tap to it, works great, use it to power my phone, and valentine 1 with no issues

Pic???

 

[smithabusa]

little overkill for just a USB, but I make these Gen3 Hayabusa Accessory Power / Dealer Mode Harness

This harness will use the dealer mode connector to trigger a relay with key on ignition power, with an inline fuse on the relay, you can power a fair bit in the trunk of your hayabusa with the mating connector I provide, or even add a fuse box of your liking. 16 gauge wiring hooks to the battery terminals directly, relay mounts in front of the battery.
The toggle switch to activate dealer mode can be unplugged and only plugged in when you want to use it.

​

 

[sixpack577]

You can also buy a battery tender pigtail for usb.
My friend has one on the Gsxr to charge his phone.

 

[bigoltool]

I'm a little groggy from the Rona, but why would you want a USB port on an ignition wire? Or is he just looking for a switched circuit to wire into?

 

[chidago]

No overkill..fuse box under left cover, ground to frame bolt by fuse box, run usb up to bars, done.

 

[Fatmanbru]

Just looking for a switched wire to tap into.

 

[Fatmanbru]

Found it! The brown wire on the fuse box is switched. Perfect place to tap for my USB port.

 

[chidago]

Yup..like I said, a easy fix, and not buying a $130 harness with relays that then has to be run to the front...lol