hav a good day pee pull. Dyno pull. Wahoooooo.
sorry, its my first on the Busa.
hav a good 1...RSD.
sorry, its my first on the Busa.
hav a good 1...RSD.
I'm off to the dyno
- Thread starter rubbersidedown
- Start date
RSD, looking at your location! U down the street from JohnnyCheese?
Post pic's just did my bike last night....
Post pic's just did my bike last night....
JC is in Texas....he's gonna have a long ride if thats the dyno he is going to run it on
thats right BAJC is in Texas....he's gonna have a long ride if thats the dyno he is going to run it onMapquest shows it to be 2,492 miles one way.
the Smurf Sycle is back.ya mean ya got the smurf bike running right again?Thats totally smurfy dude!
Have a less blue 1
.....god I make myself laugh! (and now I'm running from da rub!)
I'm not overly impressed with the numbers.
155.2 hp / 194 mph
I was hopin for better. 2000 Busa with the VaBusa exhaust mod(stock pipes) , K&N air filter . Has about 30,000 miles on her.
The dipshid who was runnin the thing didn't overly impress the Rubbah either. He fugged around for about an hour and a half makin' maps, then suggested he couldn't do much better than the stock set-up. Then I asked him (in my own sweet way) what the charge was gonna be. Guess he cut me some slack, 55 bucks.
I saw the runs of a Busa with full Akrapovic system, pinch more ponies in the mids, but the same as Rubbah's in the top.
Saw the paper on a "full on" hurt me baby, sand drag bike.
It made 20 more horse.
Interesting day . The End.
hav a good 1...RSD.
155.2 hp / 194 mph
I was hopin for better. 2000 Busa with the VaBusa exhaust mod(stock pipes) , K&N air filter . Has about 30,000 miles on her.
The dipshid who was runnin the thing didn't overly impress the Rubbah either. He fugged around for about an hour and a half makin' maps, then suggested he couldn't do much better than the stock set-up. Then I asked him (in my own sweet way) what the charge was gonna be. Guess he cut me some slack, 55 bucks.
I saw the runs of a Busa with full Akrapovic system, pinch more ponies in the mids, but the same as Rubbah's in the top.
Saw the paper on a "full on" hurt me baby, sand drag bike.
It made 20 more horse.
Interesting day . The End.
hav a good 1...RSD.
Sounds right around where it should be. Any TQ numbers?
Rubb, not bad #'s for an all stocker and canadian air
Hey, it's got 155.2 more than the toilet I ride.
nah Pipe... I didn't bother, I was gettin' bored with the punk.
He said about half way thru it... "Won't really mean much,this isn't big torque bike anyway".
"Ya" , I said, "Prolly won't produce more than about 95 or 100 foot pounds around the seven grand mark !"
About the same amount of torque as the tractor he rode to work on... hic town mechanics...
Ah, such is life. Still pretty good numbers.
How do you like the stock drilled mufflers?
How do you like the stock drilled mufflers?
RSD, of course I know your not really down the street from JC.... But, I couldn't help laughing when I saw your location. Fuggaville, not to be confused with JC's Pflugerville....thats right BAJC is in Texas....he's gonna have a long ride if thats the dyno he is going to run it onMapquest shows it to be 2,492 miles one way.
Your numbers are very close to mine for the Dyno pull.
bronc3
Registered
This, ladies & gents, is but one of the many reasons RSD has always been at the top of my list of fav-o-rite board members. Keep up the good work Rubbah, and know there is another person way, way down in Florida with a very similar outlook on life, bikes & ethnic foods.
BTW- your numbers actually look good. So does the Smurf Scycle.
Similar threads
