innovate install

[brmrc51]

just got my innovate dl-32 & lc-1 has any one done an install on a turbo busa ? I could use some advice !!

 

[heavybusa]

Here is an install on a car that might help.

http://www.innovatemotorsports.com/forums/showthread.php?t=3674

 

[202mphbusa]

Got one on mine
ask away

 

[Professor]

I'm running one, but not with a turbo. Did you already get a boost and fuel pressure sensor? I found some for about $42 each with the harness. 0-75 lbs.

 

[brmrc51]

202 busa what all are you logging ? can you log throttle position and what about duty cycle ? any tips, like which wire to tap into and how did you do the speed sensor. Thanks, bruce

 

[Professor]

Yes, you can log the TPS and injector duty cycle.

TPS, I hooked mine up near the ecu pink wire with a black trace marker. If you want to pick it up at the sensor, you want the yellow wire.
The injectors fire with a grey wire with different trace markers. White, Blk, Yellow, or red.
I monitor the Gear Position Sensor Pink wire at the ECU and sensor

I need to hook up the Speedometer on mine but it is the pink wire coming off of it.

I'd suggest fuel pressure as well.

Add RPM and the built in Pressure sensor for boost and you are already running out of channels to log.

 

[brmrc51]

professor, if you could, and if you have the time, e-mail me @ brmrc51@yahoo.com so I can give you my phone # THANKS, Bruce

 

[202mphbusa]

I am logging
A/F
TPS
RPM
Boost pressure
Clutch activation

 

[brmrc51]

hey 202mph busa, what do you mean about clutch activation ??

 

[202mphbusa]

Log read 0 volts with the clutch in
5 volts with it out

so at the dragstrip I can see when I go to launch and how quickly I can get WOT