Intake boot clamp bolts

[Bigboy Busa2]

Been putting this off for years. Had cut a slot in one screw to help but both got too bad so I spot weld 8mm bolts to tips. Now I'll never have to worry about it. Maybe Greg can get some 1 piece replacements for some more inventory to sell. I cant be the only one with this problem

 

[GIXERHP]

You are using the wrong screwdriver.
All Phillip's screws on Japanese motorcycle use JIS standard screws.
If there is a dot on the head of the screw it is JIS

jis screwdriver - Google Suche

 

[Mythos]

Nice idea on the bolt head Bigboy Busa2.

I've never used a JIS screwdriver but one of these days, I'll have to buy a set. I'd still prefer to have no screwdriver heads on the bike unless maybe in plastic parts. I think they use slotted screw heads for things that shouldn't be tightened hard. Also, sometimes for things they don't want you to ever remove and then they're so tight, it's almost impossible to not strip the slots if you try.

 

[Bigboy Busa2]

You are using the wrong screwdriver.
All Phillip's screws on Japanese motorcycle use JIS standard screws.
If there is a dot on the head of the screw it is JIS

jis screwdriver - Google Suche

Still saving my money. Have pity on a poor boy

 

[Dopey]

You are using the wrong screwdriver.
All Phillip's screws on Japanese motorcycle use JIS standard screws.
If there is a dot on the head of the screw it is JIS

jis screwdriver - Google Suche

I was just explaining these to my buddy the other day. I did notice when looking them up i seen some people saying be careful which ones you order because you'll end up with just a Phillips screwdriver.

 

[Bigboy Busa2]

Note to self. Use short screws or just the head on the right. The choke bracket will hit

 

[Vanishing Point]

Bu

You are using the wrong screwdriver.
All Phillip's screws on Japanese motorcycle use JIS standard screws.
If there is a dot on the head of the screw it is JIS

jis screwdriver - Google Suche

by The BOOK , turn 10 times airbox on tb bolts out and remove it .
Buy Vessel

 

[Mythos]

Note to self. Use short screws or just the head on the right. The choke bracket will hit

View attachment 1639564

I thought the first ones you welded on stuck out a lot more than necessary but maybe you had some purpose for that like they're easier to reach.

 

[Bigboy Busa2]

I thought I could access them better. But looking at them now that long, kinda like a hack job.

I thought the first ones you welded on stuck out a lot more than necessary but maybe you had some purpose for that like they're easier to reach.

 

[Bigboy Busa2]

Now you got me feeling self conscious. Give me a few days, I'll have it looking right.

I thought the first ones you welded on stuck out a lot more than necessary but maybe you had some purpose for that like they're easier to reach.

Gorilla weld lookin Frankenstein jack bolt, looks like a redneck blowdart. I know what ya thinking. I got you, this thing will be gold plated when I get done now. Thanks, this just turned into a $75 project. I'll be back

 

[Berlin Germany]

at all

since i bought the standard "vessels" for jis 3 years ago i haven't messed up an x-slot screw any more.
the investment of almost € 28 (at amazon) for the set of 3 was one of the best for tools in a very long time .

strongly recommended

and if they are also built with that impact-function (?) this would be the top of the top.

 

[Vanishing Point]

WINK , cheap J.I.S set

 

[Vanishing Point]

Big bolt from Tailsection

 

[Berlin Germany]

@Vanishing Point

man?
i thank you million times for that pics above

better one can´t explain what´s the diff. between the standard phillips and the jis tools

 

[202mphbusa]

Bu

by The BOOK , turn 10 times airbox on tb bolts out and remove it .
Buy Vessel View attachment 1639574

Green and black one in photo pretty much sits at the ready on top of my toolbox