JLDESIGNS TAIL TIDY

Ked0607

Ked0607

Registered
Absolutely the better option. This is the 3rd tail tidy and hopefully the last that I have done. Best fit and finish of all that I've done. 100% plug and play too. It cost more but fit was worth it.
 
If I ever put a plate back on it’ll be with that. I’m worried about having it all the way forward getting hit by the tire on pulls
 
Ked0607 said:
Absolutely the better option. This is the 3rd tail tidy and hopefully the last that I have done. Best fit and finish of all that I've done. 100% plug and play too. It cost more but fit was worth it.
Click to expand...
Its nearly the same price as purchasing to get it delivers down under ? $82 USD for postage ??
 
They mak simple tail tidy designs for like $15....crazy to me I he cost of some of the hese things
 
Just installed a JL tail tidy today. I now hear an audible click when I crank the bike from rear fairing where I plugged in the new light switch. Anyone else hear this also or any idea why?
 
J pearl said:
Just installed a JL tail tidy today. I now hear an audible click when I crank the bike from rear fairing where I plugged in the new light switch. Anyone else hear this also or any idea why?
Click to expand...
Like a relay clicking? Or electrical arc?

You may pull the panel off and make sure the connection is solid. If you do that and take a video of the clicking one of us will be able to help you with it for sure. (Unplugging the light connection and seeing if it still clicks would probably be step one anyway)
 
SS4Luck said:
Like a relay clicking? Or electrical arc?

You may pull the panel off and make sure the connection is solid. If you do that and take a video of the clicking one of us will be able to help you with it for sure. (Unplugging the light connection and seeing if it still clicks would probably be step one anyways
Click to expand...
Sounds like it is coming from the tail light. Not sure how good my phone is picking up the click.

16724997238682029288308051804184.jpg
 
J pearl said:
Sounds like it is coming from the tail light. Not sure how good my phone is picking up the click.

View attachment 1659649
Click to expand...
The click I’m hearing sounds exactly like what my bike does as well. Relay noise sounds like it comes from strange places sometimes. If you unplug the light connector does it still click? The battery and a lot of electronics are right under the seat so a lot of electrical noises come from that area in key on/start (think starter relay)

Have you had it not hot start on you yet? It makes all sorts of fucked up clicks and noises then
 
SS4Luck said:
The click I’m hearing sounds exactly like what my bike does as well. Relay noise sounds like it comes from strange places sometimes. If you unplug the light connector does it still click? The battery and a lot of electronics are right under the seat so a lot of electrical noises come from that area in key on/start (think starter relay)

Have you had it not hot start on you yet? It makes all sorts of fucked up clicks and noises then
Click to expand...
I haven't tried to start it yet with the light Unplugged. Maybe I just never noticed it until yesterday when I started it with fairing off
 
All of the noises from the electronics will be louder without the fairings on. I bet that’s just what you’re going through.
 
You must log in or register to reply here.

Similar threads

G
Extended swing arms - would you do it again?
2
Replies
25
Views
1,871
Rojo
Rojo
S
What tail tidy did you go with?
Replies
16
Views
2,469
–0——0–
–0——0–
qpddd
My new tail tidy
2
Replies
38
Views
8,477
04Duramax
0
V
Rolling Bobbin/spool recommendations for Gen 3 Busa.
2
Replies
21
Views
1,045
Rojo
Rojo
K
Fitting a Tail Tidy - Gen II
Replies
4
Views
1,941
Katana750
K
Back
Top