just did the hump mod

iride

Registered
I place my bike on the rear stand after each ride to clean and lube chain.
So I figure to do the hump mod, Like everyone said just measure go slow and eye ball it as you go,,
I still need to go in and clean it up a little as the hump has to be pushed down pretty had to latch..
generalbikes062.jpg
generalbikes061.jpg
 
Looks good. I've been thinking about doing the same to my bike, but im sure i'll end up F'n the thing up and have to buy a new one.

Fastest color as well :beerchug:
 
I doin it tomorrow, just got hump out of shed today when wifee got home with my truck and keys to shed.
Posted via Mobile Device
 
It is where you cut notches out of the hump, so you can put it on without always taking grab bar off.
 
I place my bike on the rear stand after each ride to clean and lube chain.
So I figure to do the hump mod, Like everyone said just measure go slow and eye ball it as you go,,
I still need to go in and clean it up a little as the hump has to be pushed down pretty had to latch..
generalbikes062.jpg
generalbikes061.jpg

Pics of the inside of the hump ???
 
Last edited:
It HANDLES THE WHIP DE DOOS AND the triple jumps better with the dirt bike bars :rofl:, My next motocross race is Sunday.:poke:
Its like I ride a Sport bike and not a crotch Rocket,,,,
Its a very comfortable ride,,, For a Sport bike.....
Mike
Looks good.:thumbsup: Hows it ride with the dirt bike bars? Who's setup is it?
 
It HANDLES THE WHIP DE DOOS AND the triple jumps better with the dirt bike bars :rofl:, My next motocross race is Sunday.:poke:
Its like I ride a Sport bike and not a crotch Rocket,,,,
Its a very comfortable ride,,, For a Sport bike.....
Mike

Cool I like it:thumbsup: Is it the LSR Bar Kit? And do you have any front and side pics with the dirt bike bars and did you have to trim the fairings? Good luck with the race Sunday:poke:
 
Last edited:
Yes its the LSR bars, No I did not have to trim the shield,or fairing.
The shield does make contact with the switch gear but at full lock...
Its a MRE touring shield and I had the Suzuki tall shield on and both work great, but i give the better wind block to the Suzuki shield..
I have posted better side shots somewhere on this site,
Even the wife thanks it looks better with the hump mod,,,
She hates all my Sport bikes calls them Chick magnets.. :whistle:
Mike




Cool I like it:thumbsup: Is it the LSR Bar Kit? And do you have any front and side pics with the dirt bike bars and did you have to trim the fairings? Good luck with the race Sunday:poke:
 
I have to push mine harder than I use to after the hump mod. I have clearance on all sides, not really sure why it's hard to latch. My Gen1 didn't have any issues.
 
Yes its the LSR bars, No I did not have to trim the shield,or fairing.
The shield does make contact with the switch gear but at full lock...
Its a MRE touring shield and I had the Suzuki tall shield on and both work great, but i give the better wind block to the Suzuki shield..
I have posted better side shots somewhere on this site,
Even the wife thanks it looks better with the hump mod,,,
She hates all my Sport bikes calls them Chick magnets.. :whistle:
Mike

Thats funny my wife feels the same way, she loved my Harley's. Looks good!:thumbsup:
 
Back
Top