launching

[bigbusabigbusa]

i have a stock bike besides a full tiforce system and lowered 1 1/2 inches front and rear. i wiegh 200 pounds suited. i was curios what my rear shock should be set at for launching. just a close guess and i can play with it from there. how many clicks out on the top and bottom adjuster screws. thank you

 

[Professor]

Try about 2 clicks out from full in on the rebound (bottom) to start with.

 

[bigbusabigbusa]

thanks proffessor, should i leave the comp at stock settings? thank you

 

[Professor]

I would unless it is dropping too far on launch.

The way the valving is on the rear shock when you get to the bottom 2-3 clicks of the rebound it actually starts slowing the compression down.

If you can have someone video your launch. You will be able to tell what it is doing pretty well from that.

 

[bigbusabigbusa]

thanks again i will try that. i appreciate your knowledge and your willingness to help you are a great asset to this board

 

[ktw88q]

thanks again i will try that. i appreciate your knowledge and your willingness to help you are a great asset to this board