led flasher relay help

[wht_scorpion]

i have a 2006 hayabusa i tryed to follow dierections to hook up my leds front blinker from clear alternatives and when i hooked the flasher relay up it started to smoke here is the link i use to follow www.clearalternatives.com/flasher.htm and it did not work my front blinker dont work now what could of i done wrong i use the brown wire and the light blue wire was this the wrong thing to do should i of just left the flasher relay out could it cause any damage to the lights or wiring

any idea about what flasher relay i should use i bought the bike it had leds in the rear brake light and singals thanks

 

[mikev7]

I always use 10 ohm 25 watt resistors for led's i have never used a relay before. Look for them at a electronics store. All you do is connect the positive wireS to one side and connect the negative wirE to the other.
http://images.google.com/imgres?....rl=http

 

[quizesilver]

https://www.hayabusa.org/forums/?act=ST;f=46;t=31378 << this shld help..

 

[wht_scorpion]

thanks guy that worked today i put the auto flaher in the one that came with it suc. i fix one problem geuss what my inner fender and out fender was crack all 6 holes where you put the plastic pin in it was from the cold here in ny so im looking for used or new onesp and lower
thank rich

 

[wht_scorpion]