Left side foot peg plate

reiny

Registered
I just bought a New Footpeg plate and it does not come with the 3 rubber bushings.I tried to take out the rubber bushings out of the old footpeg plate ,BUT it doesnt seem like it wants to come out:banghead::banghead::banghead::banghead::banghead:
Is there some secret to getting them out?????? Do i need a press??????
Thanks in advance,
Reiny
 
I have you tried using a little heat on the bushing or the metal around them? This might help loosen up the bushing enough to get them out.
 
The part i'm refering to is actually called a Footrest Bracket,#4321-24F00.I havent tried heat,I dont want to burn the rubber in the bushing.
 
do you have a vise? If so use a socket that is just smaller then the bushing on one side and a larger one on the other side and clamp it down. You may be able to do the same thing using a hammer to hit the smaller socket.
 
how much are new bushes ? pita i know but if you think these will be a nightmare to remove & your obviously looking for a top job may be worth replacing them ,
 
do you have a vise? If so use a socket that is just smaller then the bushing on one side and a larger one on the other side and clamp it down. You may be able to do the same thing using a hammer to hit the smaller socket.

Thank you all for your replies!
However, the above reply is the one that i chose and BINGO!!! It worked!!!!!!
My vise was at home was too small so I took it to work and with the help of 2 other guys we did it! You HAVE to have al least another person to help you hold things together( from my experience) .
THanks again for your help!!
I took her for a ride today and she runs great!!!!!!!!!!!!!!!!:beerchug::cheerleader:
 
Back
Top